ZCOM Tables and Data Structures

Interface Table

IRSERR - Restart error count

This field contains the count of the number of errors which occurred during the last restart or enable. These errors are due to $PORT or $TERM commands and will be separately reported to ZMON. This field is kept for information purposes only.

IFSTCN - Status update request count

This counts the number of $STDT replies until IFRTRY will be decremented.

INTFNO - Interface card number

This is the interface number that was specified in the Mux statement of the TTGEN configuration file.

IMAXPORTS - Maximum number of ports on card.

This field contains the maximum number of ports supported by this specific ACC interface card.

IMAXSUBC_PORT - Maximum number of subchannels per port.

This is the maximum number of subchannels supported on each port of this ACC interface card. The minimum value of this field is 1 (e.g. 2/8-channel cards).

IMAXSUBC_CARD - Maximum number of subchannels on card.

This field contains the number of subchannels supported by this card. For a non-E1/T1 card, this value should be the same as the imaxports field.

IMAXTERMS - Maximum number of terminals allowed on card.

This field contains the maximum number of terminal ZLUs that may be configured on this card.

IFNAME - Firmware download file name

This contains the full path name of the firmware file to be downloaded into this Mux card whenever the ZCOM subsystem is started, the Mux card is reset, or is recovering from a powerfail or firmware failure. It is initialized from the information supplied in the Mux statement of the TTGEN configuration file. This field is a maximum of 256 bytes including the null terminator byte.

80

Chapter 3