HP UX 11i v1 I/O Cards manual ZLU Definition

NOTE

ZCOM Message Handling

ZLU Definition

ZLU Definition

There are three types of ZLUs. These are:

•Program

•Terminal (or remote device via a communication link)

•Mapped

Program ZLUs

A Program ZLU may be either a primary ZLU or an auxiliary ZLU. All programs using ZCOM must have a primary ZLU defined. Other ZLUs may then be defined as auxiliary if required. If a message is sent to another program, then the destination ZLU is the other program’s primary or auxiliary ZLU.

Terminal ZLUs

Terminal ZLUs are used to direct messages to terminals. Before a program can receive messages from a terminal, a program must set itself up as receiver for that particular terminal’s ZLU (using the zset_rcvr routine call). Any number of programs can be set up as a receiver for a given terminal at any one time. It is possible, of course, to set up a program to route messages to other programs from the terminal ZLU.

Terminal ZLU is a generic term. The actual physical entity associated with a terminal ZLU is dependent on the particular protocol being used. For example, with a TTY protocol a Terminal ZLU would be associated with a physical terminal or terminal like device. However, with a protocol such as X.25, a terminal ZLU might represent a virtual circuit or the HDLC line (X.25 level 2).

Chapter 2 25