HP UX 11i v1 I/O Cards manual T1 ESF, Value Port Mode

ZCOM C I/F Library Routines

zport (3X)

The Z7300A or Z7330A E1/T1 card uses the following configuration:

15	14	13	12	11	10		9	8	7		6	5	4	3	2	1	0
Ecode		Fmode					0 = not used					S. Clk		0 = not used
Pmode				0 = not used					0 = Not Used
			Ecode			Value				Encoding modes
						0 0				HDB3 - High Density Bipolar/3 zeros
						0 1				B8ZS - Bipolar/8 Zero Substitution
						1 0				AMI - Alternating Mark Inversion (AMI is
										not supported)
						1 1				Not Defined
			Fmode			Value				Frame Mode parameter
						0000				T1: F4		- 4-Frame Multiframe
						0001				T1: SF		- 12-Frame Multiframe
						0010				T1: ESF		- Extended Superframe
						0011				T1: F72 - Remote Switch Mode
						0100				E1: DF		- Doubleframe
						0101				E1: MF		- CRC Multiframe
						0110				Transparent (voice) mode
			S.Clk			Value				Clock source
						0 0				External clock (slave)
						0 1				Internal clock from BRG (master)
						1 0				External RxC only (Exin)
						1 1				DPPL output (use BRG as source)
			Pmode			Value				Port Mode
						0000				Reserved
						....
						0100				Reserved
						0101				E1 Twisted pair DB9 120 ohm
						0110				E1 Coax BNC 75 ohm
						0111				T1 Twisted pair RJ45 100 ohm
						1000				Loopback Mode (Tristate)
						1001				E1 Twisted pair RJ45 100 ohm
						1010				T1 Twisted pair DB9 120 ohm
						1011				T1 Coax BNC 75 ohm

Chapter 4 259