HP UX 11i v1 I/O Cards manual Fast link-down option, Makes the line go down whenever loss of T1/E1

ZCOM C I/F Library Routines

ZCONFIG (3X)

QD	1 =	Fast link-down option
	On
		Makes the line go down whenever loss of T1/E1
		frame synchronization is detected by the FALC.
		Otherwise by default there is a delay to avoid
		marking the line down on glitches.
CR	1 =	T1/ESF PRMs transmitted as “carrier”
	On
		T1/ESF PRMs transmitted as “carrier”. The
		performance report messages transmitted in
		T1/ESF mode contain an address which
		indicates whether the ACC is a “network” or
		“user” device. By default the ACC is a “user”
		device.
NP	1 =	T1/ESF performance report messages suppressed
	On
		This option suppresses the transmission of
		performance report messages in T1/ESF mode.
LH	1 =	Long-haul mode (Z7330B only)
	On
		Enables the receive equalization and high power
		transmit line.
CF	1 =	Reduced corner frequency (Z7330B only)
	On
		The corner frequency at which jitter
		attenuation begins, is reduced by a factor of ten
		by setting this option.
JP	1 =	JT G.706 mode (Z7330B only)
	On
		In T1/ESF mode the CRC6 is calculated
		and the remote alarm processed according to JT
		G.706 (Japanese variation) by setting this
		option.

Chapter 4 195