HP UX 11i v1 I/O Cards manual

ZCOM C I/F Library Routines

ZEVENT_RCVR (3X)

eclass ZCOM Subsystem event class (type of event). Note that each event class is a single bit that can be OR’d together to specify multiple event classes in a single zevent_rcvr call.

ZcNODE_STATUS - Deliver an event when a Node or any link to a Node changes status. See the ZCOM Programmer’s reference manual for a detailed discussion of node status events.

ZcDYN_CONFIG - Deliver dynamic reconfiguration completion events. These types of events are generated by the zconfig routine after an application or protocol driver has dynamically changed the ZCOM configuration.

ZcALL_EVENTS - Deliver all classes of ZCOM alarms and events.

einfop This data structure contains any event class specific information needed to carry out the action specified. Some of this information is optional, some of it is required (depending on the action and eclass values). The fields in this data structure are listed below with their dependent class types given in parenthesis.

src_node (ZcNODE_STATUS) - This is the node that should be used to detect the node status changes. It can be the local or a remote node. This field is required when ZcNODE_STATUS is specified in the eclass parameter.

target_node (ZcNODE_STATUS) - This is the node that should be monitored. If the src_node detects a change in the status of the target_node or the link between the src_node and target_nodes, an event message will be generated. If target_node is assigned the value ZcALL_NODES, then all nodes (from the src_node’s perspective) will be monitored. This field is required when ZcNODE_STATUS is specified in the eclass parameter.

Chapter 4 211