HP UX 11i v1 I/O Cards manual Mrqcode Terminal request codes, Request Value Description

	ZCOM Tables and Data Structures
	Message Header
	MRQCODE - Terminal request code
	This field contains the request code sent to or received from the Mux
	firmware on the interface card. The message request code values are
	shown in Table 3-39.
Table 3-39	MRQCODE Terminal request codes
Request		Value	Description
ZCOM_MRQCODE_UND		0	Undefined type
ZCOM_MRQCODE_READ		1	Terminal input
ZCOM_MRQCODE_WRITE		2	Terminal write
ZCOM_MRQCODE_CNTWR		3	Terminal write
ZCOM_MRQCODE_STDT		4	(Internal Use) status transfer
ZCOM_MRQCODE_STATUS		5	Unsolicited status change
ZCOM_MRQCODE_TERM		6	Set terminal parameters
ZCOM_MRQCODE_ENB		7	Terminal enable
ZCOM_MRQCODE_DSB		8	Terminal disable
ZCOM_MRQCODE_ACT		9	Message from remote terminal
ZCOM_MRQCODE_DEA		10	Terminal deactivate
ZCOM_MRQCODE_DEL		11	Terminal delete
ZCOM_MRQCODE_PORT		14	Port configuration
ZCOM_MRQCODE_MULTI		15	Multi-completion RXDT request code

MRQTERM - Terminal number

This is the relative terminal number within the Mux card. It comes from the PTTERM field in PTT.

MRQSTAT - Request status

This is the status code returned from the protocol module and may be protocol type dependent.

MRQTAG - Tag parameter

This tag parameter is used to carry protocol specific information from the application program to the protocol module on the Mux card and return information from the firmware to the driver or application program.

112 Chapter 3