HP UX 11i v1 I/O Cards Node Status Change Event Fields Zcomsetypenode, Nodenum, Nstat, Spare

ZCOM Tables and Data Structures

Message Header

SENODE - Node where event was generated

This field will contain the ZCOM node number of the system that generated the event message. If the message type is ZCOM_MSTYPE_LSEM, this will contain the local ZCOM node number.

SETIME - Time when the event occurred

This field contains the Coordinated Universal Time (UTC) of when the event occurred. It is taken from the originating system at the time of the event.

SEDATA - Event specific data

Immediately following the header is a union that contains information specific to the type of event that occurred. There are currently two different event types that can be generated. The data structure for each is documented below.

ZCOM_SETYPE_NODE - Node status change event

The node status change event is generated whenever a node changes state or the state of the ZNODE daemon changes. The event data is referenced using sedata.node.<field name> and has the following fields:

Table 3-41	Node Status Change Event Fields (ZCOM_SETYPE_NODE)
Field Name		Field Description	Field Type	Size
				(Bytes)
NODE_NUM		Node Number	uns.short	2
NSTAT		Node status change indicator	char	1
SPARE		Reserved, not used	char	1
HSTAT		Host link status change indicator	char [4]	4

NODE_NUM - Node number

This is the number of the node that has changed state. Note that this node is different from the SENODE field. For example, in ZCOM node 10, two remote nodes 40 and 50 are defined. In node 10, if the system detects that remote node 40 has gone down, the SEM generated will have SENODE=10, SEDATA.NODE.NODE_NUM=40.

114 Chapter 3