How to Assemble & Use
Read and follow instructions in “Before First Use.”
1.Place separator on top of base as shown on page 3. Place pulp bowl in separator.
2.Place cutter/strainer into pulp bowl and gently push until firmly in place. Once in place, the cutter/strainer should spin easily.
3.Place cover on top of pulp bowl aligning arrows on front.
4.Position the top of both safety latches in place, then push in at bottom to lock. Lock both sides.
DO NOT OPERATE UNIT UNTIL SAFETY LATCHES ARE LOCKED.
5.Place a container in position under the juice spout.
NOTE: Check the pulp bowl frequently. It is important to empty the pulp bowl when full and to clean out the separator.
6.Cut food into pieces to fit the food chute. See “Tips & Techniques.”
7.Plug cord into outlet.
8.Be sure juice container is in place. Push switch to turn on. The unit will not turn on until safety latches have been closed.
9.Place food in the food chute and press lightly with food pusher. Never use fingers or utensils other than the food pusher as a food pusher. Food should be placed in food chute only when unit is operat- ing. Food can be continuously placed in food chute until pulp bowl is full without having to turn unit off .
NOTE: For best results, empty the pulp bowl before it is completely full.
10.When pulp bowl is full, turn unit off. It is very important to empty the pulp bowl when full. For best perfor- mance, empty pulp bowl and clean cutter/ strainer and separator often.
11.When juicing is completed, or when pulp bowl or juice container need to be emptied, turn unit off and unplug from outlet. Immediately wash cutter/strainer according to instructions.
Caring & Cleaning
To prolong the life of the juice extractor, it is recommended that all washable parts be washed immediately after each use.
The cutter/strainer is a very delicate screen not covered under the warranty. Do not wash in an automatic dishwasher. If bent or damaged, do not use, as it could break into small pieces and cause personal injury and/or damage the appliance. Call the
1.Turn OFF and unplug from electrical outlet.
4
2.Unlock safety latches. Remove cover. Remove cutter/strainer, pulp bowl and separator. Do not let food dry and harden on the cutter/strain- er. For hard to remove particles, use a plastic bristle brush or toothbrush.
