ZCOM C I/F Library Routines
ZCONFIG (3X)
data.setterm.portno
Port number in the interface card (0 to 7). It specifies to which port the new terminal is linked. This field is needed for actions ZcDSC_CREATE_LTT_PTT and ZcDSC_MOVE_TERM only.
data.setterm.subchno
Subchannel number on the port (0 to 31). It specifies the subchannel number the terminal will communicate over. Currently, only the Z7300A card supports subchannels. All other ACC interface card types must set this parameter to zero. This field is needed for actions ZcDSC_CREATE_LTT_PTT and ZcDSC_MOVE_TERM only.
data.setterm.dtype
Terminal device type. It is set up in the newly created terminal. This field is needed for actions ZcDSC_CREATE_LTT_PTT and ZcDSC_CREATE_LTT_ON_PTT only.
data.setterm.ltype
Logical terminal type. It is set up in the newly created terminal. This field is needed for actions ZcDSC_CREATE_LTT_PTT and ZcDSC_CREATE_LTT_ON_PTT only.
data.setterm.ltt
Logical terminal information. This contains the logical terminal information of the newly created terminal. Only the user maintainable fields (i.e. “ltaddr” and the following fields) are copied to the new logical terminal table. The other fields are ignored. This field is needed for actions ZcDSC_CREATE_LTT_PTT and ZcDSC_CREATE_LTT_ON_PTT only.
data.setterm.ptt
Physical terminal information. This contains the physical terminal information of the newly created terminal. Only the user maintainable fields (i.e. “ptpoll” and the following fields) are copied to the new physical terminal table. The other fields are ignored. In addition, the ptmx_term, subch, pendg_txreq, scfg_len, and spec_cfg fields are also ignored. This is used for action ZcDSC_CREATE_LTT_PTT only.
Chapter 4 | 205 |
