HP UX 11i v1 I/O Cards Data.setport.cnfg, Value Encoding modes, FM1 transition = FM0 transition =

ZCOM C I/F Library Routines

ZCONFIG (3X)

data.setport.cnfg

Configuration data (32 bits). This field is used for actions 1 to 4 only. The content is dependent on the specific hardware being configured. It contains the following information:

For the Z7200A, Z7400A, Z7340A, Z7350A cards:

15	14	13	12		11	10	9	8	7	6	5	4	3	2	1	0
Ecode		Sync			Mode		Parity		X. Clk		S. Clk		Baud 1
Pmode		Pmode2				Baud 2					0 = Not Used
				Ecode		Value	Encoding modes
						0 0	NRZ
						0 1	NRZI
						1 0	FM1 (transition = 1)
						1 1	FM0 (transition = 0)
				Sync		Value	Sync mode select
						0 0	8-Bit sync (monosync)
						0 1	16-Bit sync (bisync)
						1 0	SDLC Mode
						1 1	External sync
				Mode		Value	Operating mode
						0 0	Sync mode
						0 1	Async 1 stop
						1 0	Async 1.5 stop bits
						1 1	Async 2 stop bits
				Parity		Value	Parity select
						0 0	No Parity
						0 1	Odd parity
						1 0	No Parity
						1 1	Even parity

Chapter 4 191