HP UX 11i v1 I/O Cards Dscreassignift, Data.setcard.iftno, Data.setcard.itype, Data.setcard.fname

ZCOM C I/F Library Routines

ZCONFIG (3X)

Configuration Data

header.config

ZCOM_ZCONFIG_CARD (interface configuration)

header.action

ZcDSC_CHNG_FW_FILE	(1)	- Modify interface firmware file name
ZcDSC_CREATE_IFT	(2)	- Create a new interface table
ZcDSC_START_CARD	(3)	- Startup (e.g. restart) an interface card
ZcDSC_HALT_CARD	(4)	- Disable an interface
ZcDSC_STOP_CARD	(5)	- Shutdown (e.g. disable and flush) an
		interface card
DSC_REASSIGN_IFT	(6)	- Link an interface to different hardware

header.tag1,

header.tag2

Any values

data.setcard.iftno

Interface card number (0, 1,...)

data.setcard.bc1_addr

data.setcard.bc_addr

data.setcard.card_addr

These are the bus converter address and card address (as specified in a TTGEN configuration file) of the new hardware. These fields are needed for action 2 and 6 only.

data.setcard.itype

Interface card type. This indicates the hardware type of the new interface card. Currently, the types ZCOM_ITYPE_MUX, ZCOM_ITYPE_Z7200A, ZCOM_ITYPE_Z7300A, ZCOM_ITYPE_Z7340A, ZCOM_ITYPE_Z7350A, and ZCOM_ITTYPE_Z7400AR are supported. This field is needed for action 2 only.

data.setcard.fname

New firmware file name. This field is used for action 1 only.

188 Chapter 4