HP UX 11i v1 I/O Cards manual Parameters, Following fields

ZCOM C I/F Library Routines

ZINIT (3X)

PARAMETERS	sip (Return Param) ZCOM system information data structure containing
	the following fields:
	sizrev	ZCOM software revision code (4 digits).
	sinode	ZCOM system local node number.
	sinzlu	Total number of ZLU tables in the ZCOM system.
	sinltt	Total number of Logical Terminal Tables in the ZCOM system.
	sinptt	Total number of Physical Terminal Tables in the ZCOM system.
	sinift	Total number of Interface Tables in the ZCOM system.
	sintzlu	Total number of terminal ZLUs in the ZCOM system.
	siszlu1	First program ZLU in the ZLU table.
	sipqlim	Default program ZLU queue limit.
	siltsze	Size (in bytes) of the Logical Terminal Table (LTT).
	sispare	Reserved for future use.

NOTES	1. If the calling program has already opened a primary ZLU, the
	primary ZLU will be reset after calling zinit: the ZLU remains open
	and its contents is not disturbed, but it stops being the ‘primary’ ZLU
	of the calling program. The calling program will no longer have a
	primary ZLU and need to call zopen to open a primary ZLU again
	(usually with the same name, hence the same ZLU will be opened).
	The other opened ZLUs are not affected by calling zinit. See
	zopen(3X) for more information about the primary ZLU.
	2. The zinit routine will reset the node timeouts to the default values.
	Hence, any user specified node timeout must be set again after calling
	zinit. See zrntimer(3X) for more information.
	3. In a multi-threaded application, this routine is to be called only once
	by any one of the threads. Once zinit returns successfully, the
	necessary initialization tasks are completed for all threads, and all
	subsequent calls to ZCOM APIs will be allowed. There is no need for
	the other running threads or the newly created threads to call this
	routine again. Usually, zinit is to be called during the main program’s
	initialization phase, before any threads are generated.

222 Chapter 4