PREPARATION

Parts identification on assembled fan

 

Canopy

 

Collar

Downrod Cover

Blade

Motor

Housing

Blade

Detachable

Switch

Arm

Housing

Pull

Chain

PREPARATION:

Verify you have all parts before beginning the installation. Check foam insert closely for missing parts. Remove motor from packing. To avoid damage to finish, assemble motor on soft padded surface or use the original foam inset in motor box. Do not lay motor housing on its side as this could result in shifting of motor in decorative enclosure.

INSTALLING THE MOUNTING BRACKET

Caution: To avoid possible electrical shock, be sure electricity is turned off at the main power box before wiring. All wiring must be in accordance with National and Local Electrical Codes and the ceiling fan must be grounded as a precaution against possible electric shock.

1.Locate ceiling joist where fan is to be mounted, being sure location agrees with the requirements in the minimum clearance section of this guide. Wood joist must be sound and of adequate size to support 35 lbs. (See inside front cover, Items 3 and 4).

2.If not already present, mount a UL listed outlet box marked “suitable for fan support” following the instructions provided with the outlet box. The outlet box must be able to support a minimum of 35 pounds.

3.Attach hanger bracket to outlet box using screws provided

Fig. 1

with the outlet box. (Fig. 1)

3

Page 5
Image 5
Regency MX Excel owner manual Preparation, Installing the Mounting Bracket