HP UX 11i v1 I/O Cards manual Header.action ZcDSCCREATELTTPTT Create a new terminal LTT

ZCOM C I/F Library Routines

ZCONFIG (3X)

Configuration Data

header.config

ZCOM_ZCONFIG_TERM (terminal configuration)

header.action
ZcDSC_CREATE_LTT_PTT	(1)	- Create a new terminal (LTT and
	PTT)
ZcDSC_CREATE_LTT_ON_PTT	(2) - Create a new LTT on an existing
	PTT
ZcDSC_CLEAR_TERM	(3) - Clear connection to an existing
	terminal
ZcDSC_DELETE_TERM	(4)	- Delete an existing terminal
ZcDSC_MOVE_TERM	(5)	- Move an existing terminal to
	another port

header.tag1, header.tag2

Any values. data.setterm.zaddr

ZLU of the related terminal. The “node” field is not used. For action 1 and 2, if ZLU is non-zero, it must be an unassigned one and ZLU checksum is not necessary. If ZLU is zero, the system chooses an arbitrary (unused) one. For actions ZcDSC_CLEAR_TERM, ZcDSC_DELETE_TERM, and ZcDSC_MOVE_TERM, the ZLU must be defined and the ZLU checksum must be valid.

data.setterm.daddr

ZLU of the destination terminal. It specifies the destination PTT to which the newly created terminal is linked. It must be a defined terminal and the checksum must be valid. The “node” field is not used. It is used for action ZcDSC_CREATE_LTT_ON_PTT only.

data.setterm.iftno

Interface card number (0, 1,...). It specifies to which interface card the new terminal is linked. This field is needed for actions ZcDSC_CREATE_LTT_PTT and ZcDSC_MOVE_TERM only.

204 Chapter 4