Front operator's panel LEDs and switches

Front operator's panel LEDs and switches

The front operator’s panel LED fault and status conditions are defined in Table 4. Functions of the push-button switches are defined in Table 5.

Figure 18. Front operator’s panel components

1USB port

2Power active LED 3Unit fault LED 4ID LED 5On/off switch

6Reset button (recessed) 7ID LED activation switch

Table 4. Front operator's panel LED states

LED

Status

 

 

Power active

Constant green: good or positive indication

 

 

Unit fault

Constant amber: fault present

 

 

Enclosure ID

Blue: only when activated

 

 

Table 5. Front operator's panel switch functions

 

 

Push-button

 

switch

Definition

 

 

On/Off

Function of this button is dependent on the enclosure status.

 

Enclosure connected to power source but not operating.

 

Press button to activate and commence boot process.

 

Enclosure operating: Depress button for <4 seconds to turn off

 

the enclosure.

 

 

System reset

Resets the enclosure hardware and firmware.

 

This button is recessed and is activated with a ball-point pen or similar

 

implement.

 

 

Enclosure ID

Each press of this button causes the state of the blue ID LED on the Front

 

Operator's Panel and rear panel to change.

 

 

20User Guide

Page 28
Image 28
Lenovo 8332 Front operators panel LEDs and switches, Front operator’s panel components, Front operators panel LED states