Lenovo 8332 manual Front operators panel, Connectors, Server board LEDs

1PS2 mouse port
2System status LED
3MSB (POST LED)
4Bit 1 (POST LED)
5Serial port
6NIC port 1 (1 Gb)
7NIC port 2 (1 Gb)
8PS2 keyboard

9Bit 2 (POST LED)
10LSB (POST LED)
11Video port
12USB port 2
13USB port 3
14USB port 1
15USB port 0

Connectors

The following connectors are located on the server board I/O panel:

vPS2 mouse port

vPS2 keyboard port

vSerial port

vVideo port

vTwo RJ-45 ports - NICs 1 and 2 (1Gb each)

vFour USB ports: 0, 1, 2, and 3

Server board LEDs

Status LEDs: Diagnostic LEDs are located on the server board I/O panel to assist in identifying failed and failing components. See “Server board LEDs” on page 25 for a summary of status LED states.

NIC LEDs: The NIC LEDs at the right and left of each NIC port provide information on NIC status. See “I/O panel NIC LEDs” on page 25 for a summary of NIC LED states.

Front operator's panel

A front operator’s panel, consisting of a USB port, three LEDs and three push-button switches, are located on the front of the enclosure.

Note: The front operator’s panel is an integral part of the enclosure assembly and is not field replaceable.

Figure 8. Front operator’s panel components
1USB port	5Power active LED
2Unit fault LED	6ID LED

Chapter 2. Features 7