5. Hints and tips
• Software error messages
“Amplifier is not connected. Program will be started in demo mode.”
“Can not find password. Program will be terminated.”
“Hardware port error during waiting. Program will be terminated.”
“Can not find amplifier in normal mode. Program will be terminated.”
“Wrong password !”
“Password should contain from 3 till 25 characters !”
“Wrong old password !”
“Firmware for devices is absent. Upgrade devices ?”
“Amplifier is absent or firmware is broken. Try to repair firmware ?”
“Please, start program again.”
“Can not find remote for upgrade. Program will be terminated.”
“Database version is not correct.”
“Not digit XXX ! Try again.”
“Frequency should be between 10 and 30000 Hertz.”
“Q should be between 0.10 and 9.00.”
“Volume should be between +3.0 and
Software will work in Demo mode.
Password data are corrupted. Please, reinstall program again.
Please, check hardware and drivers.
Hardware in upgrade mode. Exit program. Power off/ on device. Start program again. Upgrade program after new errors.
Administrator password is wrong.
Password range limitation.
Wrong old password during password change.
Invitation to upgrade firmware.
Device internal error. Answer yes if hardware is not broken and properly connected and restart program for further upgrade.
Please, restart program.
Please, connect remote for upgrade also.
Preset file was saved with another database structure. You can see database version in automatically created file name during file save.
Edited parameter has incorrect format. Please follow correct template for parameter.
Please, follow frequency range.
Please, follow Q range.
Please, follow volume range.
16
