![](/images/new-backgrounds/1173891/17389159x1.webp)
Using the Operator Panel
| Status Information |
|
|
Message | Meaning |
|
|
Self test | The printer is performing |
Please wait | The printer is warming up and is not ready. |
| When the printer is switched on for the first time, this message will take several |
| minutes. |
|
|
Please wait | Toner is currently being replenished. This message may be displayed during |
(Adding toner) | continuous printing of a large volume of pages which require a large amount of |
| toner such as with photographs, etc. |
|
|
Please wait | The color calibration function is being performed automatically as you powered |
(Calibrating) | on the printer. |
| You can also execute this function manually on the operator panel. For details, |
| see Color Calibration on page |
|
|
Ready | The printer is ready to print. |
Processing | The printer is receiving data to print. This is also shown when the printer is |
| reading a memory card, hard disk or RAM disk. |
|
|
Sleeping | The printer is in Auto Sleep. The printer wakes from Auto Sleep whenever a key |
| on the operator panel and [GO] is pressed, the cover is opened or closed, or a |
| print job is received. The printer then warms up and goes |
| Auto Sleep, see Sleep Timer Timeout Time on page |
|
|
Cancelling data | Jobs inside the printer are being canceled. To cancel a job, see Canceling a |
| Printing Job on page |
|
|
Skipping data | The printer is skipping the data. |
Waiting | The printer is waiting for the rest of print job before completing the last page. |
| Pressing [GO] allows you to obtain the last page immediately. See below. |
FormFeed TimeOut | The printer is printing the last page after a waiting period. |
Error codes
See the Troubleshooting section in the Operation Guide.
ADVANCED OPERATION GUIDE |