![](/images/new-backgrounds/1173891/173891193x1.webp)
Using the Operator Panel
8 | Press Z and proceed to Setting the Paper Weight. |
Setting the Paper Weight
| You can set the paper thickness for your custom paper type to be |
| customized. |
1 | Display the custom paper type (see Creating Custom Paper Type on page |
|
2 | Press U or V repeatedly until >>Paper |
| Weight appears. |
3 | Press [OK] ([ENTER]). A blinking question |
| mark (?) appears. |
>>Paper Weight Normal 1
>>Paper Weight ?
Normal 1
4 | Press U or V to display the desired paper thickness. The display changes |
| as shown below. For details of the default setting for each paper type, see |
Paper Availability on page
5
6
Light
Normal 1
Normal 2
Normal 3
Heavy 1
Heavy 2
Heavy 3
Extra Heavy
When the desired paper thickness is displayed, press [OK] ([ENTER]).
Press [MENU]. The display returns to Ready.
If the optional duplexer is installed on the printer, duplex printing can be enabled and disabled. See Setting the Duplex Path on page
Setting the Duplex Path
| NOTE: To use this function, the optional duplexer must be installed on |
| the printer. |
|
|
| If the optional duplexer is installed on the printer, you can set whether or |
| not to enable duplex printing as follows. The default setting is Enable. |
1 | Display the custom paper type (see Creating Custom Paper Type on page |
|
ADVANCED OPERATION GUIDE |