![](/images/new-backgrounds/1173891/173891129x1.webp)
Using the Operator Panel
To select an optional font, press [OK] ([ENTER]) while >Font Select > is displayed. Press U or V repeatedly until Option appears and then press [OK] ([ENTER]). Press Z next to display the font selection shown above. You can perform this operation only when optional fonts are installed in the printer.
The letter before the number indicates the location of the font, as shown below:
IInternal font
SSoft (downloaded) font
MFonts in optional memory card
HFonts in RAM disk or optional hard disk
O Fonts in optional ROM (API)
5 | Press [OK] ([ENTER]). A blinking question |
| mark (?) appears. |
>>?I000
6 | Press U or V repeatedly until the desired font number appears. For font |
| numbers of the internal fonts, see Printing Lists of Fonts on page |
7
8
When the desired font is displayed, press [OK] ([ENTER]).
Press [MENU]. The display returns to Ready.
Selecting Regular or Dark Courier/Letter Gothic
Courier or Letter Gothic font thickness can be selected as Regular or Dark. In the procedure below, it is assumed that Courier is selected. The procedure is the same for Letter Gothic.
1 | Press [MENU]. |
2 | Press U or V repeatedly until Font > |
| appears. |
3 | Press Z. Press U or V until >Font |
| Select > appears. |
Font>
>Font Select > Internal
4
5
Make sure that Internal is displayed and press Z.
Press U or V repeatedly until >>Courier |
| |
>>Courier | ||
appears. If you are selecting the thickness | ||
of the Letter Gothic font, choose >> | Regular | |
Letter Gothic here instead. |
| |
|
ADVANCED OPERATION GUIDE |