![](/images/new-backgrounds/1173891/173891185x1.webp)
Using the Operator Panel
the installed optional paper feeders (from the top most paper cassette to the bottom paper cassette):
MP tray
Cassette 1
Cassette 2
Cassette 3
Cassette 4
7
8
Duplex Printing
Cassettes 2, 3 and 4 are available for selection when the optional paper feeders are installed.
When the desired paper source is displayed, press [OK] ([ENTER]).
To exit the menu selection, press [MENU].
Using the optional duplexer, you can automatically print on both sides of the paper. The duplexer is mounted underneath the printer.
Duplex printing is available for the following paper types:
Plain
Preprinted
Bond
Recycled
Rough
Letterhead
Color
Prepunched
High quality
Activating the duplexer is done by selecting either short edge or long edge binding mode.
NOTE: To use this function, the optional duplexer must be installed on the printer.
Duplex printing can be also performed from the MP tray. When the MP tray is set to First Mode (First), the paper size and paper type will be the same as those of the paper cassette currently set at the paper feed source. If the paper to be fed from the MP tray does not match the paper size and paper type of the current paper feed source cassette, a paper jam may occur.
Binding Modes
Binding refers to the manner in which printed pages of paper are joined together (by gluing, stitching, etc.) in book form. The two possible types of binding are:
ADVANCED OPERATION GUIDE |