![](/images/new-backgrounds/1173891/173891149x1.webp)
Using the Operator Panel
Setting Print Quality
The printer features the Print Quality menu which lets you select the intensity of tone mode (Normal or Fine) and gloss mode (Low or High).
Tone Mode
Tone Mode selects the way the printer handles a pixel for representing the color and halftoning for each pixel - Normal or Fine. The Fine tone mode uses
The Fine tone mode provides a print quality better than Normal, but the printing speed is slower and more memory is required.
NOTE: The amount of memory actually required may vary depending on the data to print.
1 | Press [MENU]. |
| Press U or V repeatedly until Print |
| Quality > appears. |
2 | Press Z. |
3 | Press U or V repeatedly until >Tone |
| appears. |
4 | To change the toner mode, press [OK] |
| ([ENTER]). A blinking question mark (?) |
appears.
Print Quality >
>Tone Normal
>Tone
?
Normal
5
6
7
Press U or V to change to Fine.
Press [OK] ([ENTER]) to finalize the selection.
Press [MENU]. The display returns to Ready.
ADVANCED OPERATION GUIDE |