Kyocera C5025N manual H4 Parity, H5 Protocol logic, H6 Buffer nearly-full threshold

Computer Interface

H4: Parity

	Parameter value	Baud rate
	0	None
	1	Odd
	2	Even
	3	Ignored
	The factory setting is 0 (none).
H5: Protocol logic

Parameter value	Baud rate
0	Combination of DTR (positive logic) and XON/
	XOFF
1	DTR (positive logic)
2	DTR (negative logic)
3	XON/XOFF
4	ETX/ACK

The factory setting is 0.

H6: Buffer nearly-full threshold

A percentage value from 0 to 99. The factory setting is 90.

H7: Buffer nearly-empty threshold

A percentage value from 0 to 99. The factory setting is 70. The factory settings of the buffer nearly-full and nearly-empty thresholds (H6 and H7) are subject to change without notice.

The difference between the nearly-full and nearly-empty thresholds allows the computer to send a fairly large amount of data in a continuous stream.

H8: Received data buffer size

The input buffer size is specified in increments which vary depending on the S5 parameter. When S5 is 0, the increment is 10KB. When S5 is 1, the increment is 100KB. When S5 is 2, the increment is 1024KB. The factory setting is 12 (1200KB, S5=1).

4-8 ADVANCED OPERATION GUIDE