Kyocera C5025N manual Keys, READY, DATA, and Attention Indicators, Indicator Description, GO Key

Using the Operator Panel

READY, DATA, and ATTENTION Indicators

The following indicators light during normal operation and whenever the printer needs attention. Depending on the status of lighting, each indicator has the following meaning:

Indicator Description

Flashing. Indicates an error that you can resolve. For details, see the Troubleshooting section in the Operation Guide.

On. Indicates that the printer is ready and on-line. The printer prints the data it receives.

Off. Indicates that the printer is off-line. Data can be received but will not be printed until the printer is switched on-line by pressing [GO]. Also, indicates when printing is automatically stopped due to an error condition. For details see the Troubleshooting section in the Operation Guide.

Flashing. Indicates that a data is being received. On. Indicates either that data received is being processed before printing starts, or that data received is being written to a memory card, hard disk or RAM disk.

Flashing. Indicates that the printer requires maintenance or is warming up.

On. Indicates the occurrence of a problem or an error. For details, see the Troubleshooting section in the Operation Guide.

Keys

The operator panel keys are used to configure the printer operation. Note that certain keys have a secondary function.

NOTE: The printer has a USB, parallel (FS-C5030N), network, and an optional interface. Configuration of the printer settings affect only the interface that is currently active (shown by the INTERFACE indicator on the message display). See Interface Indicator (INTERFACE) on page 2-5.

GO Key

GO switches the printer between on-line and off-line. Use this key to:

•Toggle the printer’s on-line and off-line states. You can temporarily stop the print job by switching the printer off-line.

•Print and feed out one page when the printer displays Waiting.

ADVANCED OPERATION GUIDE 2-7