Kyocera C5025N manual Selecting the Right Paper, Condition, Composition, Paper Sizes

Handling Paper

Selecting the Right Paper

This section describes the guidelines for selecting paper.

Condition

Avoid using paper that is bent at the edges, curled, dirty, torn, embossed, or contaminated with lint, clay, or paper shreds.

Use of paper in these conditions can lead to illegible printing and paper jams, and can shorten the life of the machine. In particular, avoid using paper with a surface coating or other surface treatment. Paper should have as smooth and even a surface as possible.

Composition

Do not use paper that has been coated or surface-treated and contains plastic or carbon. The heat of fusing can cause such paper to give off harmful fumes.

Bond paper should contain at least 80 % pulp. Not more than 20 % of the total paper content should consist of cotton or other fibers.

Paper Sizes

Cassettes and the MP Tray are available for the paper sizes listed in the table below. The dimensional tolerances are ±0.7mm (±0.0276 inches) for the length and width. The angle at the corners must be 90° ±0.2°.

MP tray	Size	Cassette or	Size
		MP tray
Envelope Monarch	3-7/8 × 7-1/2	Legal	8-1/2 × 14 inches
	inches
Envelope #10	4-1/8 × 9-1/2	Letter	8-1/2 × 11 inches
	inches
ISO A6	105 × 148mm	ISO A4	210 × 297mm
Envelope DL	110 × 220mm	ISO A5	148 × 210mm
Envelope #9	3-7/8 × 8-7/8	Envelope C5	162 × 229mm
	inches
Envelope #6	3-5/8 × 6-1/2	ISO B5	176 × 250mm
	inches
JIS B6	128 × 182mm	JIS B5	182 × 257mm
Statement	5-1/2 × 8-1/2	Executive	7-1/4 × 10-1/2 inches
	inches
Hagaki	100 × 148mm	Oficio II	8-1/2 × 13 inches
Ofuku-Hagaki	148 × 200mm	Folio	210 × 330mm

1-4 ADVANCED OPERATION GUIDE