![](/images/new-backgrounds/1173891/173891245x1.webp)
| Options |
|
|
5 | Remove the memory module from its package. Aligning the cutouts of the |
| memory module with the matching keys of the socket, carefully plug the |
memory module into the memory socket until it clicks in place.
Cutouts
6 | Push down the two socket clamps to secure the memory modules. |
Clamp
Clamp
7 | After you finish installing the memory modules, reinstall the main controller |
| board and fasten it with screws. |
Removing a Memory Module
To remove a memory module, remove the main controller board, then carefully push out the two socket clamps. Ease the memory module out of the socket to remove.
Testing the expanded memory
To verify that the memory modules are working properly, test them by printing a status page (see Printing a Status Page on page
ADVANCED OPERATION GUIDE |