8Operating Instructions
STATUS WINDOW
AVAILABLE ON EIDW6305
The STATUS window displays codes typically seen during normal operation or programming of the dishwasher. The STATUS window indicates the following activity:
| Indicates number of delay start |
| hours for selected cycle. |
CL | Flashes once the program has |
| been entered and the START/ |
| CANCEL key is pressed. It also |
| flashes if the door is opened during |
| a wash cycle. Close the |
| dishwasher door to begin or |
| continue a wash cycle. |
hd | Flashes to indicate a water heat |
| delay. Time remaining is displayed |
| in the center of the status window |
| when a cycle is being ran. |
WASHING | WASHING will be illuminated in the |
| upper left corner. |
CLEAN | CLEAN will illuminate on the left |
| side of the display after a cycle is |
| ran and the dishes are clean. |
SANITIZED SANITIZED will illuminate on the left side of the display after the cycle. If SANITIZE option was selected.
Start/Cancel
To start a cycle, press the START/CANCEL key once and close the door. To cancel when a cycle is running, open the door and press the START/ CANCEL key once. Close the door again and the dishwasher will drain and shut off.
NOTE
Opening the door during normal operation will only pause the selected cycle.
Error Indications
In certain situations which are critical to the ma- chine function and safe operation, the control shall shut down and indicate an error code ‘Er’ (See Error Codes on page 21). On units without a display, all indicator lights will flash.
If one of these codes are displayed contact the Electrolux Customer Care Center at