Note: It is recommended to start the quick freeze function for at least 2 hours before loading the freezer.
Option “24” Hours |
|
|
|
|
Press and hold the |
|
| button (10) and | |
| CFL | |||
|
|
|
|
|
|
|
| ||
press the | FREEZE | button (6) once. | ||
|
|
| ||
“24” will appear on the display. | ||||
Option “48” Hours |
|
|
|
|
Press and hold the |
|
| button (10) and | |
| CFL | |||
|
|
|
|
|
|
|
| ||
press the | FREEZE | button (6) twice. | ||
|
|
|
|
|
“48” will appear on the display.
Quick Cooling
This function is recommended when loading the refrigerator with a large quantity of food.
The compressor runs continuously until the refriger- ator compartment’s temperature drops down to 1oC after which the super cooling function is automati- cally disabled and the normal compressor run cycle resume to restore the latest set temperature.
Press the CFL button (10) and the COOL button (5) together to activate the function “SC” will appear on the display and the blue light will appear.
It is still possible to view the refrigerator compart- ment current temperature by pressing the 
button (8).
To disable the quick cooling function manually:
Press the CFL button (10) and COOL button (5) together again.
Cooling Fan
This function allows maintaining the same tempera- ture on all levels of the refrigerator chamber.
It is switched ON and OFF by pressing the button (12).
The yellow light (13) is turned on when the function is activated.
When the cooling fan is not switched on, the natu- ral circulation of air within the refrigerator chamber will cause different temperature zones. This is caused by the cold air sinking to the lowest section of the chamber. This should be kept in mind when
loading the refrigerator (see Using the Refrigerator Efficiently, Different Storage Zones section).
Brief Temperature Variation
Brief temperature variation may occur when the freezer door is open during loading. These varia- tions will not affect the food and the temperature will quickly return to its preset value.
Display Brightness Adjustment
There are 3 different options to adjust the bright- ness of the display;
*1.8 minimum brightness
*2.8 medium brightness
*3.8 maximum brightness (default setting)
To adjust: |
|
|
|
|
| ||||
|
|
|
|
|
|
| button (10) |
| |
| Press and hold the | CFL |
| ||||||
|
|
|
|
|
|
|
| ||
| Press the |
| button (9) to increase and the | ||||||
|
| ||||||||
|
| button (8) to decrease brightness. |
| ||||||
|
|
| |||||||
Alarm and Error Codes |
|
|
| ||||||
|
|
|
|
| |||||
Error |
|
| Type | Description | |||||
Codes |
|
|
|
|
|
|
|
| |
|
|
|
|
|
| ||||
E1 |
| Temperature sensor | Sensor | has | been | ||||
|
|
| fault in refrigerator | damaged. Call a quali- | |||||
|
|
| chamber |
|
| fied technician. | The | ||
|
|
|
|
|
|
| |||
E2 |
| Temperature | |||||||
| program | will maintain | |||||||
|
|
| sensor fault in | ||||||
|
|
| an adequate tempera- | ||||||
|
|
| freezer chamber | ||||||
|
|
| ture until the fault has | ||||||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
| been removed. |
| |
|
|
|
| ||||||
E4 |
| Door open | The freezer door has | ||||||
|
|
|
|
|
|
| been open for more | ||
|
|
|
|
|
|
| than 2 minutes |
| |
|
|
|
|
| |||||
E5 |
| Temperature in the | The temperature |
| |||||
|
|
| freezer chamber is | inside the chamber is | |||||
|
|
| too high |
|
| exceeding |
| ||
|
|
|
|
|
|
|
|
|
|
Interrupting The Alarm
The alarm can be interrupted by opening and clos- ing one of the doors or by pressing any button on the control panel for
In case of error E1/E2, the alarm can only be stopped when the damaged sensor has been changed.
9
