Waterford Precision Cycles Freestanding 70 Replacing The Light Bulb, Changing The Door Hinges

Models: Freestanding 30 Freestanding 70

1 15
Download 15 pages 49.91 Kb
Page 14
Image 14
REPLACING THE LIGHT BULB

Switch off the Quick Freeze function when the tem- perature in the freezer is a constant 18oC or colder.

REPLACING THE LIGHT BULB

Switch off the refrigerator/freezer by pressing the

ON/OFF

 

 

buttons (1), (2).

 

 

 

 

Unplug the mains lead from the wall socket. Using a philip’s head screw driver, unscrew the bulb cover (See Fig.)

Replace the bulb with a new one (max 10W, 12V, halogen base G4)

Replace the bulb cover Connect the power supply

Restart the refrigerator/freezer by pressing the

ON/OFF

 

 

buttons (1), (2).

 

 

 

 

CHANGING THE DOOR HINGES

It is possible to change the door hinges form right hinged to left hinged or vice versa.

The refrigerator/freezer must be switched off, unplugged from the wall socket and emptied completely.

*Remove the two screws in the hinge top on the right hand side of the cabinet (13).

*Lift the freezer door slightly and take the door and upper hinge off by pulling the door towards you.

*Remove the dummy hinge from the opposite side by unscrewing the two screws (14).

*Reverse the dummy hinge and refit it on the opposite side of the cabinet using two screws.

*Tilt the refrigerator to an angle of maximum 45o and unscrew the bottom hinge. This is done by removing the two screws holding the bottom hinge on the cabinet underside (15).

*Remove the bottom dummy hinge in the oppo- site side in the same way as the upper dummy hinge was removed (16).

*Reverse the dummy hinge and refit it on the opposite side of the cabinet.

*Reverse the upper right hand hinge and refit it in the lower left hand corner of the cabinet.

*Place the cabinet in the vertical position again.

*Dismount he door handle by removing the screws (17).

*Reverse the lower right hand hinge and refit it on the top part of the door in the left side of the cab- inet. Push the door into position and slide the upper hinge into the upper left hand hinge cas- ing. Tighten the two screws. Remember to adjust the hinges.

*Remove the screw on the right hand side of the door and screw them onto the left side of the door. Use the screws from the left side to attach the handles to the right hand edge of the doors (18).

13

Page 14
Image 14
Waterford Precision Cycles Freestanding 70, Freestanding 30 manual Replacing The Light Bulb, Changing The Door Hinges