Focal DUAL MANAGER user manual Default values, System and error messages

5. Hints and tips

5.4. Default values

Before Dual Manager has been executed for the first time and Presets have been defined by the user, the amplifier firmware uses default values for the various parameters, as listed below:

SECTION	PARAMETER	DEFAULT VALUE
Crossover	Slope,dB	12
	Frequency, Hz (High Pass)	500
	Frequency, Hz (Low Pass)	5000
	Crossover type	Band-Pass
	Filter type	Linkwitz-Riley
Q-Bass
	Level, dB	6
	Frequency, Hz	80
	Q	1.0
Input Section
	Channel	Left/Right
	Input Selector	Optical
Output Section
	Level,dB	0
Equalizer
	Level,dB	0
	Q	2.0
	Type	Peak
Time Delay
	ms	0
Global
	Headroom (dB)	6
	All On/Off buttons	Off
	Inverted button	Off
	File name	No Name
	User mode	Restricted

5.5. System and error messages

Hereafter is a list of system and error messages, with their explanations or contexts.

• Loading stages on start-up screen

“Wait hardware.”

“Init hardware.”

“Create amplifier screen”, “Init amplifier screen”, “Read config file”,”First device automatic selection.”

Wait idle state in hardware.

Initialize hardware data.

Create visual data.

15