•UEFI boot mode is an enhanced
You must select the boot mode in the Boot Mode field of the Boot Settings screen of System Setup. Once you specify the boot mode, the system boots in the specified boot mode and you then proceed to install your operating system from that mode. Thereafter, you must boot the system in the same boot mode (BIOS or UEFI) to access the installed operating system. Trying to boot the operating system from the other boot mode will cause the system to halt at startup.
NOTE: Operating systems must be
NOTE: For the latest information on supported operating systems, go to dell.com/ossupport.
Entering System Setup
1.Turn on or restart your system.
2.Press <F2> immediately after you see the following message:
<F2> = System Setup
If your operating system begins to load before you press <F2>, allow the system to finish booting, and then restart your system and try again.
Responding To Error Messages
If an error message is displayed while the system is booting, make a note of the message. For more information, see System Error Messages.
NOTE: After installing a memory upgrade, it is normal for your system to display a message the first time you start your system.
Using The System Setup Navigation Keys
Keys | Action |
Up arrow | Moves to the previous field. |
Down arrow | Moves to the next field. |
<Enter> | Allows you to type in a value in the selected field (if applicable) or follow the link in the field. |
Spacebar | Expands or collapses a |
<Tab> | Moves to the next focus area. |
| NOTE: For the standard graphics browser only. |
<Esc> | Moves to the previous page till you view the main screen. Pressing <Esc> in the main screen |
| displays a message that prompts you to save any unsaved changes and restarts the system. |
<F1> | Displays the System Setup help file. |
| NOTE: For most of the options, any changes that you make are recorded but do not take |
| effect until you restart the system. |
20
