Installing A Hard Drive Into A Hard-Drive Carrier
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
1.Insert the hard drive into the
2.Align the screw holes on the hard drive with the set of screw holes on the
3.Attach the screws to secure the hard drive to the
Optical Drive (Optional)
An optional
Removing The Optical Drive
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
1.Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and peripherals.
2.If installed, remove the front bezel.
3.Locate the optical drive on the front panel of the system.
4.Slide the
5.Use the ejector handle and pull the optical drive sled out of the system from the
6.Flex the left side wall of the optical sled to release the optical from the sled.
NOTE: You do not need any tools to remove the optical drive from optical sled.
59
