Figure 25. Removing and Installing the Optical Drive
1. | 2. optical drive sled | |
3. | ejector handle |
|
Installing The Optical Drive
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
NOTE: Installing an optical drive or optical blank to the optical sled does not require any tools. Follow the artwork printed on the optical sled.
1.Align the optical drive sled with the optical drive slot on the front of chassis.
2.Slide the optical drive sled into the slot until the optical drive connector engages with the SATA connector.
3.Close the system.
4.If applicable, install the front bezel.
5.Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
Cooling Fans
Your system supports six
NOTE: In the event of a failure, excessive temperature, or a problem with a particular fan, the fan number is referenced by the ESM, allowing you to easily identify and replace the particular fan by noting the fan numbers on the cooling fan assembly.
60
