Power Indicator

Condition

Pattern

 

Not lit

Power is not connected.

Green

The handle/LED indicator lights green indicating that a valid power source is connected to the

 

power supply and that the power supply is operational.

Flashing amber

Indicates a problem with the power supply.

 

CAUTION: When correcting a power supply mismatch, replace only the power supply

 

with the flashing indicator. Swapping the opposite power supply to make a matched pair

 

can result in an error condition and unexpected system shutdown. To change from a High

 

Output configuration to a Low Output configuration or vice versa, you must power down

 

the system.

 

CAUTION: AC power supplies support both 220 V and 110 V input voltages with the

 

exception of Titanium power supplies, which support only 220 V. When two identical

 

power supplies receive different input voltages, they can output different wattages, and

 

trigger a mismatch.

 

CAUTION: If two power supplies are used, they must be of the same type and have the

 

same maximum output power.

 

CAUTION: Combining AC and DC power supplies is not supported and triggers a

 

mismatch.

Flashing green

When hot-adding a power supply, this indicates that the power supply is mismatched with the

 

other power supply (in terms of efficiency, feature set, health status, and supported voltage).

 

Replace the power supply that has the flashing indicator with a power supply that matches the

 

capacity of the other installed power supply.

Related Documentation

WARNING: See the safety and regulatory information that shipped with your system. Warranty information may be included within this document or as a separate document.

NOTE: For all PowerEdge documentation, go to dell.com/poweredgemanuals and enter the system Service Tag to get your system documentation.

NOTE: For all Virtualization documents, go to dell.com/virtualizationsolutions.

NOTE: For all Dell OpenManage documents, go to dell.com/openmanagemanuals.

NOTE: For all operating system documents, go to dell.com/operatingsystemmanuals.

NOTE: For all storage controllers and PCIe SSD documents, go to dell.com/storagecontrollermanuals.

Your product documentation includes:

Getting Started Guide — Provides an overview of system features, setting up your system, and technical specifications. This document is shipped with your system and also available online at dell.com/support/manuals.

Rack Installation Instructions — Describes how to install your system into a rack. This document is shipped with your rack solution.

Any media that ships with your system that provides documentation and tools for configuring and managing your system, including those pertaining to the operating system, systems management software, system updates, and system components that you purchased with your system.

17

Page 17
Image 17
Dell E23S Series owner manual Related Documentation