Boot Settings Screen
Menu Item | Description |
Boot Mode | Allows you to set the boot mode of the system. |
| CAUTION: Switching the boot mode may prevent the system from booting if the operating |
| system is not installed in the same boot mode. |
| If the operating system supports UEFI, you can set this option to UEFI. Setting this field to BIOS |
| allows compatibility with |
| to BIOS. |
| NOTE: Setting this field to UEFI disables BIOS Boot Settings menu. Setting this field to |
| BIOS disables the UEFI Boot Settings menu. |
Boot Sequence Retry | Allows you to enable or disable the boot sequence retry feature. If this field is enabled and the |
| system fails to boot, the system reattempts the boot sequence after 30 seconds. By default, the |
| Boot Sequence Retry option is set to Disabled. |
BIOS Boot Settings | Allows you to enable or disable BIOS Boot options. |
| NOTE: This option is enabled only if the boot mode is BIOS. |
UEFI Boot Settings | Allows you to enable or disable UEFI Boot options. The Boot options include IPv4 PXE and IPv6 |
| PXE. By default, the UEFI PXE boot protocol is set to IPv4. |
| NOTE: This option is enabled only if the boot mode is UEFI. |
Allows you to enable or disable a | |
Integrated Devices Screen | |
Menu Item | Description |
Integrated RAID | Allows you to enable or disable the integrated RAID controller. By default, the Integrated RAID |
Controller | Controller option is set to Enabled. |
User Accessible USB | Allows you enable or disable the user accessible USB ports. Selecting Only Back Ports On |
Ports | disables the front USB ports and selecting All Ports Off disables both front and back USB ports. |
| By default, the User Accessible USB Ports option is set to All Ports On. |
Internal USB Port | Allows you to enable or disable the internal USB port. By default, the Internal USB Port option |
| is set to On. |
Internal SD Card Port | Enables or disables the system’s internal SD card port. By default, Internal SD Card Port option |
| is set to On. |
| NOTE: This option is displayed only if IDSDM is installed on the system board. |
Internal SD Card | If set to Mirror mode, data is written on both SD cards. If any one of the SD card fails, data is |
Redundancy | written to the active SD card. Data from this card is copied to the replacement SD card at the |
| next boot. By default, Internal SD Card Redundancy option is set to Mirror. |
24
