CAUTION: To ensure proper system cooling,
1.Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.
2.Open the system.
3.Locate and remove the memory riser.
4.Push the DIMM release tabs on the memory riser and lift the memory riser cover in the direction of the arrows.
5.Locate the
CAUTION: Handle each memory module only by the card edges, making sure not to touch the middle of the memory module or metallic contacts. To avoid damaging the memory module, handle only one memory module at a time.
6.If a memory module or a
NOTE: Retain removed
7.Align the
NOTE: The
CAUTION: To prevent damage to the
8.Press down on the memory module with your thumbs until the memory module snaps into place.
Figure 20. Installing The Memory Module |
|
| |
1. | memory module | 2. | |
3. | 4. |
NOTE: When the memory module is properly seated in the socket, the levers on the
9.Repeat step 5 through step 8 of this procedure to install the remaining memory modules.
10.Close the memory riser cover.
11.Install the memory riser.
12.Close the system.
53