Firestone 9210, NCD-5819-3, 9127 manual Tools Required, Parts List

2047 / 2232

AIR COMMAND

AIR COMPRESSOR ACCESSORY KIT

INSTALLATION INSTRUCTIONS

NOTE:

Congratulations on your purchase of a new Ride-Rite Air Compressor Accessory Kit. This kit will be an asset to your vehicle, meeting nearly any of your air supply needs.

Please take a few minutes to read through the instructions, identify the components, and learn how to properly install your Air Compressor Accessory Kit.

If you are planning to install the Ride-Rite Fully Automatic control or Cab Control Height Adjustment systems, the Air Compressor Accessory Kit and the Ride- Rite air helper springs kit designed to fit your vehicle must first be installed. Contact Firestone for more information.

			TOOLS REQUIRED:
			• UTILITY KNIFE	• 3/8" DRILL BIT
			• FLAT SCREW DRIVER	• ELECTRIC DRILL
			• WIRE CRIMPER/STRIPPER	• 1/2" WRENCH
			• (2) 9/16" OPEN-END WRENCH	• 3/8" WRENCH
PARTS LIST
COMPRESSOR	9210	1	PRESSURE SWITCH		1
AIR TANK	9127	1	COMPRESSOR T-FITTING		1
25 FT. EXTENSION HOSE	9006	1	TANK VALVE		1
3/8" -16 x 1" HEX BOLT		4	18 FT. AIR LINE TUBING	9038	1
3/8" -16 FLANGED HEX NUT		4	NYLON TIE		6
3/8" FLAT WASHER		4	15 FT. 16 GAGE WIRE WITH 1/4"
10 -32 x 1" MACHINE SCREW		3	SPADE CONNECTOR		1
10 -32 NYLON-INSERT HEX NUT		3	QUICK-SPLICE CONNECTOR		1
3/16" FLAT WASHER		6	FEMALE SPADE TERMINAL		1
PUSH-TO-CONNECT			20 AMP BLADE FUSE		1
1/4 NPT MALE FITTING		1	FUSE HOLDER		1

24-8128 03-01 NCD-5819-3