2.If a fastener is jammed in the Magazines, depress the Latch and pull back on the Sliding Magazine, pulling it out of Fixed Magazine.
3.Pull out the jammed fastener and the remainder of the fastener strip that is still in the magazine. Dispose of the remaining fastener strip; it may be bent or damaged in some other way.
4.If a fastener is jammed in the Drive Guide, pull on the Quick Release Lever (44) and disengage the Quick Release Spring (45).
5.Remove the jammed fastener; pliers maybe necessary to remove a stuck fastener.
6.Inspect the Drive Guide for any bends or breakage. If it is damaged, do not use the tool until it is repaired by a qualified technician.
7.Lightly oil the Drive Guide, engage the Quick Release Spring, and snap the Quick Release Lever back into place.
8.Make sure that the Safety Tip moves smoothly without biding.
9.Reload the Nailer and then reconnect it to the air supply.
10.Press the Safety of the Nailer against an appropriate piece of scrap wood.
11.Test fire the Nailer several times, checking for proper operation.
12.Disconnect the Nailer, remove the fasteners, and store in a location out of children’s reach.
13.If you are unable to clear the fastener jam using the method prescribed above, the tool should be taken to a qualified service technician for proper servicing.
Page 14 | For technical questions, please call | SKU 68021 |
