Linksys SPA932 manual SPA9x2 Phone Field Reference, Regional Tab, Defaults to 600@-19.2.05/0.05/1

SPA9x2 Phone Field Reference

Regional Tab

Parameter	Description
SIT3 Tone	Alternative to the Reorder Tone played when an error
	occurs as a caller makes an outbound call. The RSC to
	trigger this tone is configurable on the SIP screen.
	Defaults to 914@-16,1371@-16,1777@-16;20(.380/0/
	1,.380/0/2,.380/0/3,0/4/0)
SIT4 Tone	This is an alternative to the Reorder Tone played when
	an error occurs as a caller makes an outbound call. The
	RSC to trigger this tone is configurable on the SIP screen.
	Defaults to 985@-16,1371@-16,1777@-16;20(.380/0/
	1,.274/0/2,.380/0/3,0/4/0).
MWI Dial Tone	Played instead of the Dial Tone when there are unheard
	messages in the caller’s mailbox.
	Defaults to 350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2).
Cfwd Dial Tone	Played when all calls are forwarded.
	Defaults to 350@-19,440@-19;2(.2/.2/1+2);10(*/0/1+2).
Holding Tone	Informs the local caller that the far end has placed the
	call on hold.
	Defaults to 600@-19*(.1/.1/1,.1/.1/1,.1/9.5/1).
Conference Tone	Played to all parties when a three-way conference call is
	in progress.
	Defaults to 350@-19;20(.1/.1/1,.1/9.7/1).
Secure Call Indication Tone	Played when a call has been successfully switched to
	secure mode. It should be played only for a short while
	(less than 30 seconds) and at a reduced level (less than -
	19 dBm) so it does not interfere with the conversation.
	Defaults to 397@-19,507@-19;15(0/2/0,.2/.1/1,.1/2.1/2).
Page Tone	Specifies the tone transmitted when the paging feature
	is enabled.
	Defaults to 600@-16;.3(.05/0.05/1).
Alert Tone	Played when an alert occurs.
	Defaults to 600@-19;.2(.05/0.05/1).

Linksys SPA9x2 Phone Administration Guide 143