NAT Settings, Network Settings | Linksys SPA962, SPA942, SPA932

SPA9x2 Phone Field Reference

Ext Tab

NAT Settings

Parameter	Description

NAT Mapping Enable	To use externally mapped IP addresses and SIP/RTP ports
	in SIP messages, select yes. Otherwise, select no.
	Defaults to no.

NAT Keep Alive Enable	To send the configured NAT keep alive message
	periodically, select yes. Otherwise, select no.
	Defaults to no.

NAT Keep Alive Msg	Enter the keep alive message that should be sent periodically to
	maintain the current NAT mapping. If the value is $NOTIFY, a
	NOTIFY message is sent. If the value is $REGISTER, a
	REGISTER message without contact is sent.
	Defaults to $NOTIFY.

NAT Keep Alive Dest	Destination that should receive NAT keep alive messages. If the
	value is $PROXY, the messages are sent to the current or
	outbound proxy.
	Defaults to $PROXY.

Network Settings

Parameter	Description

SIP TOS/DiffServ Value	TOS/DiffServ field value in UDP IP packets carrying a SIP
	message.
	Defaults to 0x68.

SIP CoS Value	CoS value for SIP messages.
	Defaults to 3.

RTP TOS/DiffServ Value	ToS/DiffServ field value in UDP IP packets carrying RTP
	data.
	Defaults to 0xb8.

RTP CoS Value	CoS value for RTP data.
	Defaults to 6.

Linksys SPA9x2 Phone Administration Guide

165

Image 172

Linksys SPA962, SPA942, SPA932, SPA922 manual NAT Settings, Network Settings

Contents

Linksys SPA9x2 Phone Administration Guide Table of Contents Setting System Features Provisioning Capabilities Setting Regional Parameters Customizing SPA9x2 Extensions SPA9x2 Phone Field Reference 123 Appendix B Configuring a Dial Plan 183 LED Script 181 LED Pattern 182 Read Me First Introducing Linksys SPA9x2 PhonesRead Me First Related Documentation Getting Started Basic Phone FeaturesGetting Started Additional Phone Features Additional Phone FeaturesSPS932 Sidecar Attendant for the SPA962 Features Requring SIP Support SPA9x2 Phone Configuration Scenarios SPA9x2 Phone Configuration Scenarios SPA9000 IP PBX System SPA9000 IP PBX System SPA400 SIP Over TCP Session Initiation Protocol and SPA9x2 PhonesSession Initiation Protocol and SPA9x2 Phones Using SPA9x2 Phones with a Firewall or Router Using SPA9x2 Phones with a Firewall or RouterSIP Proxy Redundancy Network Address Translation and SPA9x2 Phones Network Address Translation and SPA9x2 Phones Routers and Service Provider Support of NAT Session Border Controllers SIP-NAT Interoperation Simple Traversal of UDP Through NATs StunSimple Traversal of UDP Through NATs Stun Using SPA9x2 Phones in a Vlan Using SPA9x2 Phones in a VlanDetermining the Type of NAT Used on Your Router Introducing Linksys SPA9x2 Phones Getting Started Determining SPA9x2 Firmware VersionDetermining SPA9x2 Firmware Version Read this chapter to learn about Upgrading SPA9x2 Firmware Downloading the FirmwareDownloading the Firmware Using the Phone Display and Buttons Using the Phone Display and Buttons See Appendix a Creating an LED Script Using the LCD Screen Using the Web User Interface Administrator and User Views Using the Web User Interface Administrator Privileges Using the Personal Directory Using the Personal DirectoryBasic and Advanced Views System Web Admin Tabs Viewing Call HistoryCaller and Called Name Matching Viewing Call History Roadmap to Web UI Features Roadmap to Web UI Features See , Setting Regional Obtaining Phone Information Info Tab Obtaining Phone Information Info Tab Product Information Notes System and Product InformationSystem and Product Information Phone Status Information Understanding Lines, Calls, and Shared Call AppearancesPhone Status Notes Phone Status Information Shared Line or Call Appearances Understanding ExtensionsUnderstanding Lines, Calls, and Shared Call Appearances Line Key LEDs Extension Status InformationExtension Status Information Line and Call Status Information Extension Status NotesLine and Call Status Notes Line and Call Status Information Downloaded Ring Tones What’s Next?Ring Tone Notes Downloaded Ring Tones What’s Next? Setting System Features Setting Security FeaturesSetting Security Features SIP Initial Invite and MWI Challenge Srtp and Securing Calls Supported Codecs Ensuring Voice QualityEnsuring Voice Quality Bandwidth Requirements Factors Affecting Voice Quality Setting System Features Setting System FeaturesSee the following sections System Configuration Notes Setting System Configuration InformationSetting System Configuration Information Setting Internet, IP and PPPoE Information Setting a Static IP Address on the IP PhoneSetting Internet, IP and PPPoE Information Dhcp and PPPoE Notes Setting Optional Network Parameters Optional Network Configuration NotesSetting Optional Network Parameters HostName Enter the host name of the SPA9x2 phone Vlan Settings Notes Configuring Vlan SettingsConfiguring Vlan Settings SIP Parameters Setting SIP ParametersSIP Parameters SIP Parameter Notes Following table describes all SIP parameters See , Using the SPA932 Sidecar SIP Timer Notes SIP Timer ValuesSIP Timer Values SIP T4 Response Status Code Handling Response Status Code Handling RTP Parameters Response Status NotesRTP Notes RTP Parameters Defaults to blank SDP Payload TypesNAT Support Parameters SDP Payload Parameters Linksys Key System Parameters NAT Support Parameter NotesLinksys Key System Notes Linksys Key System Parameters Service provider documentation Provisioning BasicsProvisioning Capabilities Provisioning Capabilities SPA9x2 Configuration Profiles Provisioning Configuration from Phone KeypadSPA9x2 Configuration Profiles Flat-profile AdminPasswdsome secret/AdminPasswd Upgrading, Resyncing, and Rebooting Phones Upgrading, Resyncing, and Rebooting PhonesUpgrading Firmware on a Phone Rebooting a Phone Resyncing a Phone Retail Provisioning Redundant Provisioning ServersRedundant Provisioning Servers Configuration Access Control Using HttpsAutomatic In-House Preprovisioning Automatic In-House Preprovisioning Firmware Upgrade Parameters Using HttpsHow Https Works Server Certificates Counts down to zero Sample Configuration File Sample Configuration FileFollowing is a sample configuration file General Purpose Parameters Setting Regional Parameters Example 1 Normal Ring Setting Regional Parameters Example 3 SIT Tone Call Progress Tones Notes Call Progress TonesCall Progress Tones Control Timer Values sec Control Timer Value NotesDistinctive Ring Patterns Ring Pattern Notes Vertical Service Activation Codes Star Codes Vertical Service Activation Codes Star Codes Vertical Service Activation Code Notes Setting Regional Parameters Using Star Codes to Activate/Deactivate Services Disabling/Deactivating Services Vertical Service Announcement CodesVertical Service Announcement Codes Vertical Service Announcement Notes SAmap syntax SAserv=SAextcode Miscellaneous Parameters Outbound Call Codec Selection CodesOutbound Call Codec Selection Notes Miscellaneous Parameters Dtmf Notes Managing the Time and Date Localizing Your SPA9x2 PhoneLocalizing Your SPA9x2 Phone Configuring Daylight Savings Time Selecting a Language Selecting a Language Creating a Dictionary Server Script For example DictionaryServerScript ua=na Customizing SPA9x2 Phones General Phone InformationGeneral Phone Notes General Phone Information Background SPA942/962 section on Using the Photo Album Feature on the SPA962 Changing the Display Background SPA942/962 Configuring Shared Line Extension on SPA9x2 Phones Line Key InformationLine Key Notes Line Key Information Miscellaneous Line Key Settings Notes Line Key LED Pattern Notes Parameters Description Supplementary Services Parameters Supplementary Services NotesSupplementary Services Parameters Abbreviations are spelled out in the following table Voice conversation is encrypted so that others cannot Using Call Parking Using Group PagingUsing Call Pick Up and Group Call Pick Up Ring Tone Parameters Ring Tone Parameters Managing Ring Tones Audio Input Gain dB and Extension Mobility Settings Using Extension MobilityAudio Input Gain dB and Extension Mobility Settings Extension Mobility Notes General, Shared Line Appearance, and NAT Settings General, Shared Line Appearance, and NAT SettingsCustomizing SPA9x2 Extensions General Parameter Notes NAT Settings Notes Network Settings and SIP Settings Network Settings NotesSIP Settings Notes Network Settings and SIP Settings Select no Call Feature Notes Call Feature SettingsCall Feature Settings Proxy and Registration Parameters Proxy and Registration Parameters Configuring a SIP Proxy Server Configuring a SIP Proxy ServerEnter your service provider name in the Proxy field Audio Configuration Parameters Subscriber Information ParametersSubscriber Information Notes Subscriber Information Parameters Audio Configuration Parameters Audio Configuration Notes Dial Plan Parameters Dial Plan Parameters Dial Plan Notes This table describes all Dial Plan parameters Handling Customizing Users Call Forward and Speed Dial ParametersCall Forward Notes Speed Dial Notes Supplementary Services Supplementary Services Setting RSS Newsfeeds on the SPA962 Phone Web Information Service Settings SPA962 OnlySetting RSS Newsfeeds on the SPA962 Phone You can also configure web services on the web UI Audio Volume Settings Web Information Service NotesTraffic Information Settings Audio Volume Notes Phone GUI Color Settings SPA962 Only Phone GUI Color Settings SPA962 OnlyPhone LCD Notes Using the SPA932 Sidecar Setting Up the SPA932 Sidecar Setting Up the SPA932 SidecarFollowing table describes SPA932 LED colors Configuring the SPA9000 for the SPA932 Configuring the Broadsoft Server for the SPA932 Configuring the Asterisk Server for the SPA932 Home Configuring the SPA932 Unit/Key Configuration Scripts SPA9000 Syntax SPA932 Parameter Notes Asterisk syntax SPA932 Unit Monitoring Notes Monitoring the SPA932Monitoring the SPA932 Line Station Subscribe SPA9x2 Phone Field Reference Info TabSystem Information Info Tab Product Information Phone Status Ext Status Elapsed TimeExample, 25 days Packets Line /Call Status System Configuration System TabDownloaded Ring Tone System Tab Internet Connection Type and Static IP Settings PPPoE Settings Optional Network Configuration Vlan Settings SIP TabSIP Parameters SIP Tab Defaults to $VERSION There is no default this indicates SPA9x2 does notDefaults to application/dtmf-relay Defaults to no Call-ID for registration after the next software reboot. If ID for registration after the next software reboot.Registration after a power-cycle, regardless of this Setting SIP Timer Values sec Response Status Code Handling SIT2 Tone Defaults to blank SIT3 Tone Defaults to blankLimit on Icmp errors Defaults to RTP Parameters Call Round Trip Delay value ms in the Info Ms,LA=delay in ms,DU=call durationRtcp Tx Interval Send out compound Rtcp packet on the connection RTP-Start-Loopback Dynamic Payload SDP Payload TypesRTP-Start-Loopback Codec Linksys SPA9x2 Phone Administration Guide 138 NAT Support Parameters Insert VIA receivedResponses if the received-from IP and VIA sent-by IP VIA sent-by port. Select yes or no from the drop Linksys Key System Parameters Provisioning Tab Regional TabCall Progress Tones Provisioning Tab Regional Tab Defaults to 914@-16,1371@-16,1777@-1620.380/0 Defaults to 985@-16,1371@-16,1777@-1620.380/0Cfwd Dial Tone Played when all calls are forwarded Defaults to 350@-1920.1/.1/1,.1/9.7/1 Distinctive Ring Patterns Cadence Control Timer Values sec Vertical Service Activation Codes Defaults to *90 Defaults to *66Defaults to *92 Defaults to *82 Removes caller ID blocking on the next inbound call Linksys SPA9x2 Phone Administration Guide 148 Referral Services Codes Feature Dial Services Codes One or more *code can be configured into thisFeature allows the proxy to process features like call Vertical service codes internally processed by Vertical Service Announcement Codes Defaults to *0272616 Defaults to *0172624Defaults to *0272624 Defaults to *0172632 Defaults to GMT-0800 MiscellaneousFour digits GMT+1300 Daylight Saving Time Rule Weekday value equals any value in the range Phone Tab Phone Tab General Service provider often hosts a voice mail service.Advantages of hosted voicemail include Line Key Other words it is private Miscellaneous Line Key Settings Line Key LED Pattern Default value of c=rp=f Leaving this entry blank indicates the default valueEntry blank indicates the default value of c=r Blank indicates the default value of c=a Indicates the default value of c=rp=s Supplementary ServicesRegistering LED Ring Tone 4, 5, or Auto Input Gain dB Ext Tab Extension MobilityExt Tab Speakerphone Input Gain Shared, regardless the setting of Share Call Defaults to sharedShare Line Appearance Are shared or private NAT Settings Network Settings SIP Settings Referor Bye Delay Delay, enter the appropriate period of time in secondsRefer-To Target Contact Referee Bye Delay It responds with the message, unsupported. Enter Defaults to none Log. Choices are as followsNone-No logging Line-Logs the start-line only for all messages Call Feature Settings Default Ring State Agent Reserved feature Cfwd Notify ServSending of a Notify to the phone when a call is Or User Proxy and Registration Subscriber Information Audio Configuration For establishment of a secure call G729a Enable G723 EnableG726-16 Enable G726-24 Enable Dial Plan User TabUser Tab Defaults to voice mail Call ForwardSpeed Dial Busy Web Information Service Settings SPA962 Traffic Service Information Settings SPA962Audio Volume Phone GUI Menu Color Settings SPA962 only Light Green Pink Silver Defaults to Light Blue Tab SPA962 onlyTab SPA962 only This tab includes the following sections Unit SPA932 StatusSPA932 Status Sidecar unit Color is green and pattern is steady on default Creating an LED ScriptColor is red and pattern is slow blink LED is off LED Pattern Configuring a Dial Plan Allows arbitrary 2-digit star code Dial Plan Rules Dial Plan Examples Dial Plan Timers Dial Plans Contacts US/Canada ContactsEU Contacts Support 8060952NC-EW