Linksys SPA922 Selecting a Language, Daylight Saving Time Examples, Setting Regional Parameters

Setting Regional Parameters

Selecting a Language

Daylight Saving Time Examples

The following example configures daylight savings time for the U.S, adding one hour starting at midnight on the first Sunday in April and ending at midnight on the last Sunday of October ; add 1 hour (USA, North America):

start=4/1/7/0:0:0;end=10/31/7/0:0:0;save=1 start=4/1/7;end=10/-1/7;save=1 start=4/1/7/0;end=10/-1/7/0;save=1

The following example configures daylight savings time for Egypt, starting at midnight on the last Sunday in April and ending at midnight on the last Sunday of September:

start=4/-1/5;end=9/-1/4;save=1 (Egypt)

The following example configures daylight savings time for New Zealand, starting at midnight on the first Sunday of October and ending at midnight on the third Sunday of March. This only applie to countries that recognize daylight savings time.

start=10/1/7;3/22/7;save=1 (New Zealand)

The following example reflects the new change starting March 2007. DST starts on the second Sunday in March and ends on the first Sunday in November:

start=3/8/7/02:0:0;end=11/1/7/02:0:0;save=1

Selecting a Language

This section describes how to localize the SPA9x2 phone display language. You can define up to nine languages, in addition to English, to be available and host the dictionaries for each of the languages on the HTTP or TFTP provisioning server. Language support follows Cisco dictionary principles.

NOTE: For complete information on selecting a language, see the LVS Installation and Configuration Guide.

Use the Language Selection parameter to select the phone’s default display language. The value must match one of the languages supported by the dictionary server. The script (dx value) is as follows: <Language_Selection ua="na">

</Language_Selection>

Defaults to blank; the maximum number of characters is 512. For example: <Language_Selection ua="na"> Spanish

</Language_Selection>

During startup, the phone checks the selected language and downloads the dictionary from the TFTP/HFTP provisioning server indicated in the phone’s configuration. The dictionaries are available at the following website:

http://www.linksys-itsp.com

Linksys SPA9x2 Phone Administration Guide 80