Defaults to *66, Defaults to *90, Defaults to *92 | Linksys SPA942

SPA9x2 Phone Field Reference

Regional Tab

Parameter	Description

Call Return Code	This code calls the last caller.
	Defaults to *69.

Blind Transfer Code	Begins a blind transfer of the current call to the
	extension specified after the activation code.
	Defaults to *98.

Call Back Act Code	Starts a callback when the last outbound call is not busy.
	Defaults to *66.

Call Back Deact Code	Cancels a callback.
	Defaults to *86.

Cfwd All Act Code	Forwards all calls to the extension specified after the
	activation code.
	Defaults to *72.

Cfwd All Deact Code	Cancels call forwarding of all calls.
	Defaults to *73.

Cfwd Busy Act Code	Forwards busy calls to the extension specified after the
	activation code.
	Defaults to *90.

Cfwd Busy Deact Code	Cancels call forwarding of busy calls.
	Defaults to *91.

Cfwd No Ans Act Code	Forwards no-answer calls to the extension specified after
	the activation code.
	Defaults to *92.

Cfwd No Ans Deact Code	Cancels call forwarding of no-answer calls.
	Defaults to *93.

CW Act Code	Enables call waiting on all calls.
	Defaults to *56.

CW Deact Code	Disables call waiting on all calls.
	Defaults to *57.

Linksys SPA9x2 Phone Administration Guide

146

Image 153

Linksys SPA942, SPA962, SPA932, SPA922 manual Defaults to *66, Defaults to *90, Defaults to *92

Contents

Linksys SPA9x2 Phone Administration Guide Table of Contents Provisioning Capabilities Setting System Features Setting Regional Parameters Customizing SPA9x2 Extensions SPA9x2 Phone Field Reference 123 LED Script 181 LED Pattern 182 Appendix B Configuring a Dial Plan 183 Introducing Linksys SPA9x2 Phones Read Me FirstRead Me First Related Documentation Basic Phone Features Getting StartedGetting Started Additional Phone Features Additional Phone FeaturesSPS932 Sidecar Attendant for the SPA962 Features Requring SIP Support SPA9x2 Phone Configuration Scenarios SPA9x2 Phone Configuration Scenarios SPA9000 IP PBX System SPA9000 IP PBX System SPA400 Session Initiation Protocol and SPA9x2 Phones SIP Over TCPSession Initiation Protocol and SPA9x2 Phones Using SPA9x2 Phones with a Firewall or Router Using SPA9x2 Phones with a Firewall or RouterSIP Proxy Redundancy Network Address Translation and SPA9x2 Phones Network Address Translation and SPA9x2 Phones Session Border Controllers Routers and Service Provider Support of NAT Simple Traversal of UDP Through NATs Stun SIP-NAT InteroperationSimple Traversal of UDP Through NATs Stun Using SPA9x2 Phones in a Vlan Using SPA9x2 Phones in a VlanDetermining the Type of NAT Used on Your Router Introducing Linksys SPA9x2 Phones Determining SPA9x2 Firmware Version Getting StartedDetermining SPA9x2 Firmware Version Read this chapter to learn about Downloading the Firmware Upgrading SPA9x2 FirmwareDownloading the Firmware Using the Phone Display and Buttons Using the Phone Display and Buttons See Appendix a Creating an LED Script Using the Web User Interface Using the LCD Screen Using the Web User Interface Administrator and User Views Administrator Privileges Using the Personal Directory Using the Personal DirectoryBasic and Advanced Views System Viewing Call History Web Admin TabsCaller and Called Name Matching Viewing Call History Roadmap to Web UI Features Roadmap to Web UI Features See , Setting Regional Obtaining Phone Information Info Tab Obtaining Phone Information Info Tab System and Product Information Product Information NotesSystem and Product Information Understanding Lines, Calls, and Shared Call Appearances Phone Status InformationPhone Status Notes Phone Status Information Understanding Extensions Shared Line or Call AppearancesUnderstanding Lines, Calls, and Shared Call Appearances Extension Status Information Line Key LEDsExtension Status Information Extension Status Notes Line and Call Status InformationLine and Call Status Notes Line and Call Status Information What’s Next? Downloaded Ring TonesRing Tone Notes Downloaded Ring Tones What’s Next? Setting Security Features Setting System FeaturesSetting Security Features SIP Initial Invite and MWI Challenge Srtp and Securing Calls Ensuring Voice Quality Supported CodecsEnsuring Voice Quality Bandwidth Requirements Factors Affecting Voice Quality Setting System Features Setting System FeaturesSee the following sections Setting System Configuration Information System Configuration NotesSetting System Configuration Information Setting a Static IP Address on the IP Phone Setting Internet, IP and PPPoE InformationSetting Internet, IP and PPPoE Information Dhcp and PPPoE Notes Optional Network Configuration Notes Setting Optional Network ParametersSetting Optional Network Parameters HostName Enter the host name of the SPA9x2 phone Configuring Vlan Settings Vlan Settings NotesConfiguring Vlan Settings Setting SIP Parameters SIP ParametersSIP Parameters Following table describes all SIP parameters SIP Parameter Notes See , Using the SPA932 Sidecar SIP Timer Values SIP Timer NotesSIP Timer Values SIP T4 Response Status Code Handling Response Status Code Handling Response Status Notes RTP ParametersRTP Notes RTP Parameters SDP Payload Types Defaults to blankNAT Support Parameters SDP Payload Parameters NAT Support Parameter Notes Linksys Key System ParametersLinksys Key System Notes Linksys Key System Parameters Provisioning Basics Service provider documentationProvisioning Capabilities Provisioning Capabilities Provisioning Configuration from Phone Keypad SPA9x2 Configuration ProfilesSPA9x2 Configuration Profiles Flat-profile AdminPasswdsome secret/AdminPasswd Upgrading, Resyncing, and Rebooting Phones Upgrading, Resyncing, and Rebooting PhonesUpgrading Firmware on a Phone Resyncing a Phone Rebooting a Phone Redundant Provisioning Servers Retail ProvisioningRedundant Provisioning Servers Using Https Configuration Access ControlAutomatic In-House Preprovisioning Automatic In-House Preprovisioning Using Https Firmware Upgrade ParametersHow Https Works Server Certificates Counts down to zero Sample Configuration File Sample Configuration FileFollowing is a sample configuration file General Purpose Parameters Setting Regional Parameters Example 1 Normal Ring Setting Regional Parameters Example 3 SIT Tone Call Progress Tones Call Progress Tones NotesCall Progress Tones Control Timer Value Notes Control Timer Values secDistinctive Ring Patterns Ring Pattern Notes Vertical Service Activation Codes Star Codes Vertical Service Activation Codes Star Codes Vertical Service Activation Code Notes Setting Regional Parameters Using Star Codes to Activate/Deactivate Services Vertical Service Announcement Codes Disabling/Deactivating ServicesVertical Service Announcement Codes Vertical Service Announcement Notes SAmap syntax SAserv=SAextcode Outbound Call Codec Selection Codes Miscellaneous ParametersOutbound Call Codec Selection Notes Miscellaneous Parameters Dtmf Notes Localizing Your SPA9x2 Phone Managing the Time and DateLocalizing Your SPA9x2 Phone Configuring Daylight Savings Time Selecting a Language Selecting a Language Creating a Dictionary Server Script For example DictionaryServerScript ua=na General Phone Information Customizing SPA9x2 PhonesGeneral Phone Notes General Phone Information Background SPA942/962 section on Changing the Display Background SPA942/962 Using the Photo Album Feature on the SPA962 Line Key Information Configuring Shared Line Extension on SPA9x2 PhonesLine Key Notes Line Key Information Line Key LED Pattern Notes Miscellaneous Line Key Settings Notes Parameters Description Supplementary Services Notes Supplementary Services ParametersSupplementary Services Parameters Abbreviations are spelled out in the following table Voice conversation is encrypted so that others cannot Using Group Paging Using Call ParkingUsing Call Pick Up and Group Call Pick Up Ring Tone Parameters Ring Tone Parameters Managing Ring Tones Using Extension Mobility Audio Input Gain dB and Extension Mobility SettingsAudio Input Gain dB and Extension Mobility Settings Extension Mobility Notes General, Shared Line Appearance, and NAT Settings General, Shared Line Appearance, and NAT SettingsCustomizing SPA9x2 Extensions General Parameter Notes NAT Settings Notes Network Settings Notes Network Settings and SIP SettingsSIP Settings Notes Network Settings and SIP Settings Select no Call Feature Settings Call Feature NotesCall Feature Settings Proxy and Registration Parameters Proxy and Registration Parameters Configuring a SIP Proxy Server Configuring a SIP Proxy ServerEnter your service provider name in the Proxy field Subscriber Information Parameters Audio Configuration ParametersSubscriber Information Notes Subscriber Information Parameters Audio Configuration Parameters Audio Configuration Notes Dial Plan Parameters Dial Plan Parameters This table describes all Dial Plan parameters Dial Plan Notes Handling Call Forward and Speed Dial Parameters Customizing UsersCall Forward Notes Speed Dial Notes Supplementary Services Supplementary Services Web Information Service Settings SPA962 Only Setting RSS Newsfeeds on the SPA962 PhoneSetting RSS Newsfeeds on the SPA962 Phone You can also configure web services on the web UI Web Information Service Notes Audio Volume SettingsTraffic Information Settings Audio Volume Notes Phone GUI Color Settings SPA962 Only Phone GUI Color Settings SPA962 OnlyPhone LCD Notes Using the SPA932 Sidecar Setting Up the SPA932 Sidecar Setting Up the SPA932 SidecarFollowing table describes SPA932 LED colors Configuring the Broadsoft Server for the SPA932 Configuring the SPA9000 for the SPA932 Home Configuring the Asterisk Server for the SPA932 Configuring the SPA932 Unit/Key Configuration Scripts SPA9000 Syntax Asterisk syntax SPA932 Parameter Notes Monitoring the SPA932 SPA932 Unit Monitoring NotesMonitoring the SPA932 Line Station Subscribe Info Tab SPA9x2 Phone Field ReferenceSystem Information Info Tab Phone Status Product Information Elapsed Time Ext StatusExample, 25 days Packets Line /Call Status System Tab System ConfigurationDownloaded Ring Tone System Tab PPPoE Settings Internet Connection Type and Static IP Settings Optional Network Configuration SIP Tab Vlan SettingsSIP Parameters SIP Tab There is no default this indicates SPA9x2 does not Defaults to $VERSIONDefaults to application/dtmf-relay Defaults to no ID for registration after the next software reboot. Call-ID for registration after the next software reboot. IfRegistration after a power-cycle, regardless of this Setting SIP Timer Values sec Response Status Code Handling SIT3 Tone Defaults to blank SIT2 Tone Defaults to blankLimit on Icmp errors Defaults to RTP Parameters Ms,LA=delay in ms,DU=call duration Call Round Trip Delay value ms in the InfoRtcp Tx Interval Send out compound Rtcp packet on the connection SDP Payload Types RTP-Start-Loopback Dynamic PayloadRTP-Start-Loopback Codec Linksys SPA9x2 Phone Administration Guide 138 Insert VIA received NAT Support ParametersResponses if the received-from IP and VIA sent-by IP VIA sent-by port. Select yes or no from the drop Linksys Key System Parameters Regional Tab Provisioning TabCall Progress Tones Provisioning Tab Regional Tab Defaults to 985@-16,1371@-16,1777@-1620.380/0 Defaults to 914@-16,1371@-16,1777@-1620.380/0Cfwd Dial Tone Played when all calls are forwarded Defaults to 350@-1920.1/.1/1,.1/9.7/1 Cadence Distinctive Ring Patterns Vertical Service Activation Codes Control Timer Values sec Defaults to *66 Defaults to *90Defaults to *92 Removes caller ID blocking on the next inbound call Defaults to *82 Linksys SPA9x2 Phone Administration Guide 148 Referral Services Codes One or more *code can be configured into this Feature Dial Services CodesFeature allows the proxy to process features like call Vertical service codes internally processed by Vertical Service Announcement Codes Defaults to *0172624 Defaults to *0272616Defaults to *0272624 Defaults to *0172632 Miscellaneous Defaults to GMT-0800Four digits GMT+1300 Weekday value equals any value in the range Daylight Saving Time Rule Phone Tab Phone Tab Service provider often hosts a voice mail service. GeneralAdvantages of hosted voicemail include Other words it is private Line Key Line Key LED Pattern Miscellaneous Line Key Settings Leaving this entry blank indicates the default value Default value of c=rp=fEntry blank indicates the default value of c=r Blank indicates the default value of c=a Supplementary Services Indicates the default value of c=rp=sRegistering LED 4, 5, or Ring Tone Auto Input Gain dB Extension Mobility Ext TabExt Tab Speakerphone Input Gain Defaults to shared Shared, regardless the setting of Share CallShare Line Appearance Are shared or private Network Settings NAT Settings SIP Settings Delay, enter the appropriate period of time in seconds Referor Bye DelayRefer-To Target Contact Referee Bye Delay It responds with the message, unsupported. Enter Log. Choices are as follows Defaults to noneNone-No logging Line-Logs the start-line only for all messages Call Feature Settings State Agent Reserved feature Cfwd Notify Serv Default RingSending of a Notify to the phone when a call is Or User Proxy and Registration Subscriber Information For establishment of a secure call Audio Configuration G723 Enable G729a EnableG726-16 Enable G726-24 Enable User Tab Dial PlanUser Tab Call Forward Defaults to voice mailSpeed Dial Busy Traffic Service Information Settings SPA962 Web Information Service Settings SPA962Audio Volume Phone GUI Menu Color Settings SPA962 only Tab SPA962 only Light Green Pink Silver Defaults to Light BlueTab SPA962 only This tab includes the following sections SPA932 Status UnitSPA932 Status Sidecar unit Creating an LED Script Color is green and pattern is steady on defaultColor is red and pattern is slow blink LED is off LED Pattern Allows arbitrary 2-digit star code Configuring a Dial Plan Dial Plan Rules Dial Plan Examples Dial Plan Timers Dial Plans US/Canada Contacts ContactsEU Contacts Support 8060952NC-EW