Linksys SPA942, SPA962, SPA932, SPA922 manual Response Status Code Handling

SPA9x2 Phone Field Reference

SIP Tab

Parameter	Description
Reg Retry Random Delay	Random delay range (in seconds) to add to <Register
	Retry Intvl> when retrying REGISTER after a failure. This
	feature was added in Release 5.1.
	Defaults to blank, which disables this feature.
Reg Retry Long Random	Random delay range (in seconds) to add to <Register
Delay	Retry Long Intvl> when retrying REGSITER after a failure.
	This feature was added in Release 5.1.
	Defaults to blank, which disables this feature.
Reg Retry Intvl Cap	The maximum value to cap the exponential back-off
	retry delay (which starts at <Register Retry Intvl> and
	doubles on every REGISTER retry after a failure). In other
	words, the retry interval is always at <Register Retry
	Intvl> seconds after a failure. If this feature is enabled,
	<Reg Retry Random Delay> is added on top of the
	exponential back-off adjusted delay value. This feature
	was added in Release 5.1.
	Defaults to blank, which disables the exponential back-
	off feature.
Sub Min Expires	This value sets the lower limit of the REGISTER expires
	value returned from the Proxy server.
Sub Max Expires	This value sets the upper limit of the REGISTER min-
	expires value returned from the Proxy server in the Min-
	Expires header. Defaults to 7200.
Sub Retry Intvl	This value (in seconds) determines the retry interval
	when the last Subscribe request fails. Defaults to 10.

Response Status Code Handling

Parameter

SIT1 RSC

Description

SIP response status code for the appropriate Special Information Tone (SIT). For example, if you set the SIT1 RSC to 404, when the user makes a call and a failure code of 404 is returned, the SIT1 tone is played. Reorder or Busy Tone is played by default for all unsuccessful response status code for SIT 1 RSC through SIT 4 RSC. Defaults to blank.

Linksys SPA9x2 Phone Administration Guide 134