Linksys SPA932, SPA962, SPA942, SPA922 manual Dial Plans

Configuring a Dial Plan

Dial Plans

Dial Plan parameters contain the actual dial plan scripts for each line (extension) n, where n is a number from 1 to 4 on the SPA942 and 1 to 6 on the SPA962..

The Dial_Plan[n] for Each Line n defaults to:

(*xx [3469]11 0 00 <:1408>[2-9]xxxxxx 1[2-9]xx[2-9]xxxxxx 011x. )

The default dial plan script for each line is as follows:

(*xx[3469]11000[2-9]xxxxxx1xxx[2-9]xxxxxxxxxxxxxxxxxx.).

If IP dialing is enabled, one can dial [user-id@]a.b.c.d[:port], where ‘@’, ‘.’, and ‘:’ are dialed by entering *, user-id must be numeric (like a phone number) and a, b, c, d must be between 0 and 255, and port must be larger than 255.

If port is not given, 5060 is used. Port and User-Id are optional.

If the user-id portion matches a pattern in the dial plan, then it is interpreted as a regular phone number according to the dial plan. The INVITE message, however, is still sent to the outbound proxy if it is enabled.

Linksys SPA9x2 Administration Guide 187