Linksys Official IP Phone Manual for Optimal Configuration

SPA9x2 Phone Field Reference

System Tab

Optional Network Configuration

Parameter	Description
Host Name	The host name of the SPA9x2.
Domain	The network domain of the SPA9x2.
Primary DNS	DNS server used by SPA9x2 in addition to DHCP supplied
	DNS servers if DHCP is enabled; when DHCP is disabled,
	this is the primary DNS server.
	Defaults to 0.0.0.0.
Secondary DNS	DNS server used by SPA9x2 in addition to DHCP supplied
	DNS servers if DHCP is enabled; when DHCP is disabled,
	this is the secondary DNS server.
	Defaults to 0.0.0.0.
DNS Server Order	Specifies the method for selecting the DNS server. The
	options are Manual, Manual/DHCP, and DHCP/Manual.
DNS Query Mode	Do parallel or sequential DNS Query. With parallel
	DNS query mode, the SPA9x2 sends the same request to
	all the DNS servers at the same time when doing a DNS
	lookup, the first incoming reply is accepted by the
	SPA9x2.
	Defaults to parallel.
Syslog Server	Specify the syslog server name and port. This feature
	specifies the server for logging SPA9x2 system
	information and critical events. If both Debug Server and
	Syslog Server are specified, Syslog messages are also
	logged to the Debug Server.
Debug Server	The debug server name and port. This feature specifies
	the server for logging SPA9x2 debug information. The
	level of detailed output depends on the debug level
	parameter setting.
Debug Level	The debug level from 0-3. The higher the level, the more
	debug information is generated. Zero (0) means no
	debug information is generated. To log SIP messages,
	you must set the Debug Level to at least 2.
	Defaults to 0.
Primary NTP Server	IP address or name of primary NTP server.

Linksys SPA9x2 Phone Administration Guide 129