Linksys SPA942, SPA962, SPA932, SPA922 manual Sample Configuration File, General Purpose Parameters

Provisioning Basics

Sample Configuration File

General Purpose Parameters

The following table defines the function and usage of each parameter in the General Purpose Parameters section of the Provisioning tab.

•GPP_A through GPP_P: General purpose provisioning parameters. These parameter can be used as variables in provisioning and upgrade rules. They are referenced by prepending the variable name with a ‘$’ character, such as $GPP_A.

You can optionally Require Admin Password to Reset Unit to Factory Defaults (see last line of sample config file).

Sample Configuration File

Following is a sample configuration file:

Set_Local_Date_(mm/dd) "" ;

Set_Local_Time_(HH/mm) "" ;

Time_Zone "GMT-07:00" ; # options: GMT-12:00/GMT-11:00/GMT-10:00/GMT-09:00/GMT-08:00/GMT-07:00/GMT-06:00/GMT- 05:00/GMT-04:00/GMT-03:30/GMT-03:00/GMT-02:00/GMT-01:00/GMT/GMT+01:00/GMT+02:00/GMT+03:00/GMT+03:30/ GMT+04:00/GMT+05:00/GMT+05:30/GMT+05:45/GMT+06:00/GMT+06:30/GMT+07:00/GMT+08:00/GMT+09:00/GMT+09:30/ GMT+10:00/GMT+11:00/GMT+12:00/GMT+13:00

FXS_Port_Impedance "600" ; # options: 600/900/600+2.16uF/900+2.16uF/270+750150nF/220+820120nF/220+820115nF/ 370+620310nF

FXS_Port_Input_Gain "-3" ;

FXS_Port_Output_Gain "-3" ;

DTMF_Playback_Level "-16" ;

DTMF_Playback_Length ".1" ; Detect_ABCD "Yes" ; Playback_ABCD "Yes" ;

Caller_ID_Method "Bellcore(N.Amer,China)" ; # options: Bellcore(N.Amer,China)/DTMF(Finland,Sweden)/DTMF(Denmark)/ETSI DTMF/ETSI DTMF With PR/ETSI DTMF After Ring/ETSI FSK/ETSI FSK With PR(UK)

FXS_Port_Power_Limit "3" ; # options: 1/2/3/4/5/6/7/8 Protect_IVR_FactoryReset “No” ;

Note that you can optionally require an admin password to reset the phone to factory defaults by setting the last line parameter to “yes.”

If you are a service provider with a password, see the Linksys SPA Provisioning Guide.

Linksys SPA9x2 Phone Administration Guide 62