Linksys SPA962, SPA942, SPA932, SPA922 manual Counts down to zero

Provisioning Basics

Using HTTPS

Parameter	Description
Upgrade_Enable	Enables firmware upgrade operations independently of resync actions.
	Defaults to Yes.
Upgrade_Error_Retry_	The upgrade retry interval (in seconds) applied in case of upgrade failure.
Delay	The device has a firmware upgrade error timer that activates after a failed
	firmware upgrade attempt. The timer is initialized with the value in this
	parameter. The next firmware upgrade attempt occurs when this timer
	counts down to zero.
	The default is 3600 seconds.
Downgrade_Rev_Limit	Enforces a lower limit on the acceptable version number during a
	firmware upgrade or downgrade. The device does not complete a
	firmware upgrade operation unless the firmware version is greater than or
	equal to this parameter.
	The default is (empty).
Upgrade_Rule	This parameter is a firmware upgrade script with the same syntax as
	Profile_Rule. Defines upgrade conditions and associated firmware URLs.
	The default is (empty).
Log_Upgrade_Request	Syslog message issued at the start of a firmware upgrade attempt.
_Msg	The default is
	$PN $MAC -- Requesting upgrade $SCHEME://$SERVIP:$PORT$PATH
Log_Upgrade_Success_	Syslog message issued after a firmware upgrade attempt completes
Msg	successfully.
	The default is
	$PN $MAC -- Successful upgrade $SCHEME://$SERVIP:$PORT$PATH -- $ERR
Log_Upgrade_Failure_	Syslog message issued after a failed firmware upgrade attempt.
Msg	The default is
	$PN $MAC -- Upgrade failed: $ERR.
License Keys	This field is empty.

Linksys SPA9x2 Phone Administration Guide 61