Manuals / Linksys / Communications / Telephone

Linksys SPA932, SPA962 RTP Parameters, Response Status Notes, RTP Notes, Setting SIP Parameters

Models: SPA942

1 196

Download 196 pages 29.34 Kb

Page 58

RTP Parameters

Setting SIP Parameters

RTP Parameters

Response Status Notes

•SIT1 RSC: SIP response status code for the appropriate Special Information Tone (SIT). For example, if you set the SIT1 RSC to 404, when the user makes a call and a failure code of 404 is returned, the SIT1 tone is played. Reorder or Busy Tone is played by default for all unsuccessful response status code for SIT 1 RSC through SIT 4 RSC.

Defaults to blank.

•Try Backup RSC: SIP response code that retries a backup server for the current request. Defaults to blank.

•Retry Reg RSC : Interval the SPA9x2 waits before re-trying registration after a failed registration. Defaults to blank.

RTP Parameters

RTP Notes

•Max RTP ICMP Err: Number of successive ICMP errors allowed when transmitting RTP packets to the peer before the SPA9x2 terminates the call. If the value is set to 0 (the default), the SPA9x2 ignores the limit on ICMP errors, disabling the feature.

•RTCP Tx Interval: Interval for sending out RTCP sender reports on an active connection. During an active connection, the SPA9x2 can be programmed to send out compound RTCP packet on the connection.

Each compound RTP packet except the last one contains a sender report (SR) and a source description (SDES). The last RTCP packet contains an additional BYE packet. Each SR except the last one contains exactly 1 reciever report (RR); the last SR carries no RR. The SDES contains CNAME, NAME, and TOOL identifiers. :

–CNAME is set to User ID@Proxy

–NAME is set to Display Name (or Anonymous if user blocks caller ID)

–TOOL is set to the Vendor/Hardware-platform-software-version (such as Linksys/ SPA9x2-5.2.2(SCb)).

–The NTP timestamp used in the SR is a snapshot of the SPA9x2’s local time, not the time reported by an NTP server.

–If the SPA9x2 receives a RR from the peer, it tries to compute the round trip delay and show it as the Call Round Trip Delay value in the Info section of SPA9x2 web page. It can range from 0 to 255 seconds. Defaults to 0 (recommended).

Linksys SPA9x2 Phone Administration Guide

51

Image 58

Linksys SPA932, SPA962, SPA942, SPA922 manual RTP Parameters, Response Status Notes, RTP Notes, Setting SIP Parameters

Contents

Interim version released June 2008 to be updated August Linksys SPA9x2 Phone Administration GuideADMINISTRATION GUIDE BUSINESS SERIESChapter 1 Introducing Linksys SPA9x2 Phones Table of ContentsChapter 2 Getting Started Chapter 5 Provisioning Basics Chapter 3 Setting System FeaturesChapter 4 Setting SIP Parameters Table of ContentsChapter 7 Customizing SPA9x2 Phones Chapter 6 Setting Regional ParametersTable of Contents Chapter 9 Customizing Users Chapter 10 Using the SPA932 SidecarChapter 8 Customizing SPA9x2 Extensions Table of ContentsChapter 11 SPA9x2 Phone Field Reference Table of ContentsAppendix C Contacts Appendix B Configuring a Dial PlanAppendix A Creating an LED Script Table of ContentsIntroducing Linksys SPA9x2 Phones Introducing Linksys SPA9x2 PhonesRead Me First Finding Text in a PDFIntroducing Linksys SPA9x2 Phones Related Documentation6. Click Search Read Me First”Additional Phone Features” section on page Basic Phone Features”Basic Phone Features” section on page ”SPA9x2 Phone Configuration Scenarios” section on pageSPS932 Sidecar Attendant for the SPA962 Additional Phone FeaturesAdditional Phone Features Introducing Linksys SPA9x2 PhonesAdditional Phone Features Features Requring SIP SupportIntroducing Linksys SPA9x2 Phones SPA9x2 Phone Configuration Scenarios SPA9x2 Phone Configuration ScenariosIntroducing Linksys SPA9x2 Phones SPA9000 IP PBX System SPA9000 IP PBX SystemIntroducing Linksys SPA9x2 Phones SIP-PSTN UserBGateway Switch Internet WAN Interface Linksys SPA9x2 Phone Administration GuidePSTN switch UserD 1 to 4 DID lines Introducing Linksys SPA9x2 PhonesSession Initiation Protocol and SPA9x2 Phones Session Initiation Protocol and SPA9x2 PhonesSIP Over TCP Introducing Linksys SPA9x2 PhonesSIP Proxy Redundancy Using SPA9x2 Phones with a Firewall or RouterUsing SPA9x2 Phones with a Firewall or Router Introducing Linksys SPA9x2 PhonesNetwork Address Translation and SPA9x2 Phones ”Routers and Service Provider Support of NAT” section on pageNetwork Address Translation and SPA9x2 Phones Introducing Linksys SPA9x2 PhonesSession Border Controllers Routers and Service Provider Support of NATSTUN Server Enable see ”NAT Support Parameters” section on page ”Session Border Controllers” section on pageSimple Traversal of UDP Through NATs STUN Simple Traversal of UDP Through NATs STUNSIP-NAT Interoperation Introducing Linksys SPA9x2 Phones3. Click Admin Login advanced Using SPA9x2 Phones in a VLANUsing SPA9x2 Phones in a VLAN Determining the Type of NAT Used on Your RouterIntroducing Linksys SPA9x2 Phones Using SPA9x2 Phones in a VLANShows information about the interfaces your router uses ”Using the Web User Interface” section on page ”Using the Phone Display and Buttons” section on page”Using the LCD Screen” section on page ”Using the Personal Directory” section on pageDownloading the Firmware Downloading the FirmwareUpgrading SPA9x2 Firmware Getting StartedUsing the Phone Display and Buttons Using the Phone Display and ButtonsGetting Started Phone Feature see Appendix A Creating an LED ScriptUsing the Phone Display and Buttons Getting StartedUsing the Web User Interface Using the LCD ScreenGetting Started Using the Web User Interface Administrator and User ViewsGetting Started http//phone.ip.address/admin Administrator PrivilegesAdmin Login Web Pages Using the Web User InterfaceUsing the Personal Directory Using the Personal DirectoryUser Login Web Pages Basic and Advanced ViewsViewing Call History Web Admin TabsSetup 3 Call History Caller and Called Name MatchingSee Chapter 3, Setting System Roadmap to Web UI FeaturesRoadmap to Web UI Features FeaturesSee Chapter 7, Customizing See Chapter 6, Setting RegionalSee Chapter 5, Provisioning SPA9x2 PhonesSidecar Obtaining Phone Information Info TabObtaining Phone Information Info Tab See ”System and ProductSystem and Product Information System and Product InformationProduct Information Notes ”Line and Call Status Information”Phone Status Notes Phone Status InformationUnderstanding Lines, Calls, and Shared Call Appearances Phone Status InformationUnderstanding Lines, Calls, and Shared Call Appearances Understanding ExtensionsShared Line or Call Appearances Getting StartedExtension Status Information Extension Status InformationLine Key LEDs Getting StartedLine and Call Status Notes Line and Call Status InformationExtension Status Notes Line and Call Status InformationRing Tone Notes Downloaded Ring TonesWhat’s Next? Downloaded Ring TonesWhat’s Next? Getting StartedSetting System Features Setting System FeaturesSetting Security Features Setting Security FeaturesSetting System Features SRTP and Securing Calls4. Click Submt All Changes Setting Security FeaturesSecure Call Indication Tone Ensuring Voice QualitySupported Codecs Ensuring Voice QualitySetting System Features Bandwidth RequirementsEnsuring Voice Quality Setting System Features Factors Affecting Voice QualityEnsuring Voice Quality ”Setting a Static IP Address on the IP Phone” section on page Setting System FeaturesSetting System Features Setting System FeaturesSetting System Configuration Information Setting System Configuration InformationSystem Configuration Notes Setting System FeaturesSetting Internet, IP and PPPoE Information Setting Internet, IP and PPPoE InformationSetting a Static IP Address on the IP Phone DHCP and PPPoE NotesSetting Optional Network Parameters Setting Optional Network ParametersOptional Network Configuration Notes Setting System FeaturesConfiguring VLAN Settings Configuring VLAN SettingsVLAN Settings Notes Setting System Features”SIP Parameters” section on page ”SIP Timer Values” section on page Setting SIP ParametersSetting SIP Parameters SIP ParametersSIP Parameters SIP Parameter NotesSetting SIP Parameters ParameterSIP Parameters Setting SIP Parameterssee Chapter 10, Using the SPA932 Sidecar ParameterSIP Timer Values SIP Timer ValuesSIP Timer Notes Setting SIP ParametersParameter Setting SIP ParametersSIP Timer Values DescriptionMinimum and maximum random delay to be added to the long added to the short timerREGISTER after a failure. RegRetryLongRandomDelay Long Intvl when retrying REGISTER after a failureRTP Notes RTP ParametersResponse Status Notes RTP ParametersSDP Payload Parameters SDP Payload TypesNAT Support Parameters SDP Payload TypesLinksys Key System Notes Linksys Key System ParametersNAT Support Parameter Notes Linksys Key System Parameters”Using HTTPS” section on page ”Upgrading, Resyncing, and Rebooting Phones” section on page”Configuration Access Control” section on page ”Firmware Upgrade Parameters” section on pageSPA9x2 Configuration Profiles SPA9x2 Configuration ProfilesProvisioning Configuration from Phone Keypad Provisioning BasicsSPA9x2 web UI Provisioning Firmware Upgrade Upgrade Enable yes Upgrading, Resyncing, and Rebooting PhonesUpgrading, Resyncing, and Rebooting Phones Upgrading Firmware on a PhoneUpgrading, Resyncing, and Rebooting Phones Rebooting a PhoneResyncing a Phone Provisioning Basicshttps//prov.supervoip.com/linksys-init Redundant Provisioning ServersRetail Provisioning Redundant Provisioning ServersAutomatic In-House Preprovisioning Configuration Access ControlUsing HTTPS Automatic In-House PreprovisioningHow HTTPS Works Firmware Upgrade ParametersUsing HTTPS Server CertificatesProvisioning Basics Using HTTPSProfileRule. Defines upgrade conditions and associated firmware URLs ParameterGeneral Purpose Parameters Sample Configuration FileSample Configuration File Provisioning Basics”Control Timer Values sec” section on page Setting Regional ParametersSetting Regional Parameters ”Vertical Service Activation Codes Star Codes” section on pageExample 1 Normal Ring Advanced Scripting for Cadences, Call Progress Tones, and Ring TonesSetting Regional Parameters Example 2 Distinctive Ring short,short,short,longSetting Regional Parameters Advanced Scripting for Cadences, Call Progress Tones, and Ring TonesAdvanced Scripting for Cadences, Call Progress Tones, and Ring Tones Setting Regional Parameters1 = A classic phone with mechanical bell 2 = Typical phone ring Call Progress Tones Call Progress TonesCall Progress Tones Notes Setting Regional ParametersDistinctive Ring Patterns Control Timer Values secControl Timer Value Notes Ring Pattern NotesSetting Regional Parameters Vertical Service Activation Codes Star CodesVertical Service Activation Codes Star Codes FieldSetting Regional Parameters Vertical Service Activation Code NotesVertical Service Activation Codes Star Codes Vertical Service Activation Codes Star Codes Setting Regional ParametersReferral Services Codes One or more * code can b* codee configured into this parameter, such as *98, or *97*98*123, and so on. The maximum total length is 79 characters Setting Regional Parameters Using Star Codes to Activate/Deactivate ServicesVertical Service Activation Codes Star Codes Vertical Service Announcement Codes Vertical Service Announcement CodesDisabling/Deactivating Services Setting Regional ParametersSetting Regional Parameters Vertical Service Announcement NotesVertical Service Announcement Codes 10 Do Not Disturb DDT DND enabled DDF DND disabled Setting Regional ParametersVertical Service Announcement Codes WDF CWCID disabled 13 Block Anonymous callOutbound Call Codec Selection Codes Configuring Daylight Savings Time” Daylight Saving Time Examples”Miscellaneous Parameters Outbound Call Codec Selection NotesSetting Regional Parameters DTMF NotesMiscellaneous Parameters Localizing Your SPA9x2 Phone Localizing Your SPA9x2 PhoneManaging the Time and Date Setting Regional ParametersSetting Regional Parameters Configuring Daylight Savings TimeLocalizing Your SPA9x2 Phone Selecting a Language Selecting a LanguageDaylight Saving Time Examples Setting Regional ParametersSetting Regional Parameters Creating a Dictionary Server ScriptSelecting a Language Selecting a Language Setting Regional ParametersLinksys SPA9x2 Phone Administration Guide For example DictionaryServerScript ua=na”Using Call Parking” section on page ”Using the Photo Album Feature on the SPA962” section on page”Supplementary Services Parameters” section on page ”Using Call Pick Up and Group Call Pick Up” section on pageCustomizing SPA9x2 Phones service provider often hosts a voice mail service. Theadvantages of hosted voicemail include General Phone Information6. Click Submit All Changes Using the Photo Album Feature on the SPA962Changing the Display Background SPA942/962 Customizing SPA9x2 PhonesLine Key Notes Configuring Shared Line Extension on SPA9x2 PhonesLine Key Information Line Key InformationCustomizing SPA9x2 Phones Miscellaneous Line Key Settings NotesLine Key LED Pattern Notes Line Key Information“c” indicates “color” the color of the LED Customizing SPA9x2 PhonesLine Key Information “r” indicates “red” a red-colored LEDSupplementary Services Parameters Supplementary Services ParametersSupplementary Services Notes Customizing SPA9x2 Phoneseavesdrop on the conversation. To enable this feature the Supplementary Services ParametersEnables/Disables Call pick up feature see ”Using Call Pick Up and Group CallUsing Call Pick Up and Group Call Pick Up Using Group PagingUsing Call Parking Supplementary Services ParametersRing Tone Parameters Ring Tone ParametersCustomizing SPA9x2 Phones Customizing SPA9x2 Phones Managing Ring TonesRing Tone Parameters Audio Input Gain dB and Extension Mobility Settings Audio Input Gain dB and Extension Mobility SettingsUsing Extension Mobility Extension Mobility Notes”General, Shared Line Appearance, and NAT Settings” section on page General, Shared Line Appearance, and NAT SettingsGeneral, Shared Line Appearance, and NAT Settings ”Network Settings and SIP Settings” section on pageCustomizing SPA9x2 Extensions NAT Settings NotesGeneral, Shared Line Appearance, and NAT Settings ParameterSIP Settings Notes Network Settings and SIP SettingsNetwork Settings Notes Network Settings and SIP SettingsWhen enabled, authorization is required for initial incoming If this feature is enabled, the IP telephony ignores furtherDefaults to no StickyCall Feature Settings Call Feature SettingsCall Feature Notes Customizing SPA9x2 ExtensionsProxy and Registration Parameters Proxy and Registration ParametersCustomizing SPA9x2 Extensions 1. Select Admin Advanced Configuring a SIP Proxy ServerConfiguring a SIP Proxy Server Customizing SPA9x2 ExtensionsSubscriber Information Notes Audio Configuration ParametersSubscriber Information Parameters Subscriber Information ParametersAudio Configuration Parameters Customizing SPA9x2 ExtensionsCustomizing SPA9x2 Extensions Audio Configuration NotesAudio Configuration Parameters ParameterDial Plan Parameters Defaults to yesDial Plan Parameters in outbound SDPCustomizing SPA9x2 Extensions Dial Plan NotesSee Appendix B Configuring a Dial Plan for more detailed Dial Plan ParametersParameter Customizing SPA9x2 ExtensionsDial Plan Parameters Description”Web Information Service Settings SPA962 Only” section on page ”Supplementary Services” section on page”Setting RSS Newsfeeds on the SPA962 Phone” section on page ”Audio Volume Settings” section on pageSupplementary Services Notes Supplementary ServicesSupplementary Services Customizing UsersSetting RSS Newsfeeds on the SPA962 Phone Setting RSS Newsfeeds on the SPA962 PhoneWeb Information Service Settings SPA962 Only Customizing UsersTraffic Information Settings Audio Volume SettingsWeb Information Service Notes Audio Volume NotesPhone LCD Notes Phone GUI Color Settings SPA962 OnlyPhone GUI Color Settings SPA962 Only Customizing Users”Configuring the SPA9000 for the SPA932” section on page Using the SPA932 SidecarUsing the SPA932 Sidecar ”Configuring the Broadsoft Server for the SPA932” section on pageUsing the SPA932 Sidecar Setting Up the SPA932 SidecarSetting Up the SPA932 Sidecar Using the SPA932 Sidecar Configuring the SPA9000 for the SPA932Configuring the Broadsoft Server for the SPA932 Setting Up the SPA932 SidecarUsing the SPA932 Sidecar Configuring the Asterisk Server for the SPA932Setting Up the SPA932 Sidecar Using the SPA932 Sidecar Configuring the SPA932Setting Up the SPA932 Sidecar Using the SPA932 Sidecar Unit/Key Configuration Scripts10. Click Submit All Changes Setting Up the SPA932 SidecarUsing the SPA932 Sidecar SPA9000 SyntaxBroadsoft syntax Setting Up the SPA932 SidecarUsing the SPA932 Sidecar SPA932 Parameter NotesAsterisk syntax Setting Up the SPA932 SidecarMonitoring the SPA932 Monitoring the SPA932SPA932 Unit Monitoring Notes Using the SPA932 SidecarMonitoring the SPA932 Using the SPA932 SidecarLine Station Subscribe SPA9x2 Phone Field Reference SPA9x2 Phone Field ReferenceInfo Tab System InformationIndicates any additional licenses that you have installed Product InformationPhone Status SPA9x2 Phone Field ReferenceInfo Tab Ext StatusSPA9x2 Phone Field Reference Total number of RTP packets sent including redundantSPA9x2 Phone Field Reference Line /Call StatusInfo Tab Internet Connection Type and Static IP Settings, page System ConfigurationSystem Configuration, page Optional Network Configuration, page VLAN Settings, pageLets you enable or disable local access to the web UIweb Internet Connection Type and Static IP SettingsPPPoE Settings SPA9x2 Phone Field ReferenceSPA9x2 Phone Field Reference Optional Network ConfigurationThe debug server name and port. This feature specifies System TabSIP Tab VLAN SettingsSIP Parameters, page SIP Timer Values sec, page SIP ParametersNumber of times an invite can be redirected to avoid an SPA9x2 Phone Field ReferenceSIP Tab this is not specified, the SIP User Agent Name is alsoEnables support for the Broadsoft Hold Package, which Enables support for the Broadsoft Talk Package, whichenables a user to answer or resume a call by clicking a which enables a user to start a conference by clicking aSIP Tab SIP Timer Values secSPA9x2 Phone Field Reference INVITE final response, time-out value, which can rangeSPA9x2 Phone Field Reference Response Status Code HandlingDefaults to blank, which disables the exponential back SIP TabSIP Tab RTP ParametersSPA9x2 Phone Field Reference reception. RTP Port Min and RTP Port Max shouldSIP Tab attempts to compute the round trip delay and show it asSPA9x2 Phone Field Reference connection. It can range from 0 to 255 seconds. DuringSIP Tab SDP Payload TypesSPA9x2 Phone Field Reference RTP-Start-Loopback DynamicSIP Tab SPA9x2 Phone Field ReferenceG711u Codec Name SPA9x2 Phone Field Reference NAT Support ParametersSIP Tab SPA9x2 Phone Field Reference Linksys Key System ParametersSIP Tab Provisioning Tab Control Timer Values sec, pageVertical Service Activation Codes, page Regional TabPlayed when a call is waiting. Defaults to 440@-1030.3 Regional TabPlayed when a 486 RSC is received for an outbound call SPA9x2 Phone Field ReferencePlayed instead of the Dial Tone when there are unheard an error occurs as a caller makes an outbound call. TheRSC to trigger this tone is configurable on the SIP screen Played to all parties when a three-way conference call isDistinctive Ring Patterns Defaults to60.2/.4,.2/.4,.2/4Defaults to 600.25/9.75 SPA9x2 Phone Field ReferenceLong timeout between entering digits when dialing. The Control Timer Values secVertical Service Activation Codes The InterdigitLongTimer is used after any one digit, ifRegional Tab Starts a callback when the last outbound call is not busySPA9x2 Phone Field Reference Forwards busy calls to the extension specified after theRegional Tab SPA9x2 Phone Field ReferenceCW Per Call Act Code Regional Tab SPA9x2 Phone Field ReferenceSecure One Call Deact Code SPA9x2 Phone Field Reference Referral Services CodesRegional Tab SPA9x2 Phone Field Reference Feature Dial Services CodesRegional Tab Outbound Call Codec Selection Codes Vertical Service Announcement CodesSPA9x2 Phone Field Reference Regional TabSPA9x2 Phone Field Reference Regional TabSPA9x2 Phone Field Reference MiscellaneousRegional Tab SPA9x2 Phone Field Reference Daylight Savings Time EnableRegional Tab General, page Phone TabPhone Tab SPA9x2 Phone Field ReferenceGeneral Line Key, page Miscellaneous Line Key Settings, pageLine Key LED Pattern, page Supplementary Services, page Ring Tone, page Auto Input Gain dB, pageSPA9x2 Phone Field Reference Line KeyPhone Tab SPA9x2 Phone Field Reference Miscellaneous Line Key SettingsLine Key LED Pattern Phone TabLED pattern during the Remote Ringing state, where the LED pattern when the Call Appearance is disabled notLED pattern during the Local Ringing state, when the call LED pattern during the Local Active state, where the callSPA9x2 Phone Field Reference Supplementary ServicesLED Pattern when the corresponding extension is trying Phone TabSPA9x2 Phone Field Reference Ring Tonecenters. Typically enabled with the SIP-B parameter Phone TabSPA9x2 Phone Field Reference Auto Input Gain dBPhone Tab Ext Tab General, page Share Line Appearance, page NAT Settings, pageNetwork Settings, page SIP Settings, page Call Feature Settings, page Extension MobilitySPA9x2 Phone Field Reference Audio Configuration, page Dial Plan, pageShare Line Appearance GeneralSPA9x2 Phone Field Reference NAT SettingsNetwork Settings Ext TabSPA9x2 Phone Field Reference SIP SettingsControls how the jitter buffer should be adjusted. Select Ext TabSPA9x2 Phone Field Reference settings Referor, Refer Target, Referee, and Refer-ToExt Tab response for an outbound INVITE. To enable this feature listen port. This feature controls which SIP messages toIf this feature is enabled, the IP telephony ignores further SPA9x2 Phone Field Referenceoutbound proxy is contacted. Music-on-hold is disabled Call Feature Settingsserver. When only a user ID is specified, the current or Defaults to imusic when used with a SPA9000 IP PBXSPA9x2 Phone Field Reference Defaults toSpecifies whether to enable a SIP-B feature regarding the Ext TabExt Tab Proxy and RegistrationSPA9x2 Phone Field Reference Outbound Proxy is no or Outbound Proxy is emptySPA9x2 Phone Field Reference Subscriber InformationUsing multiple DNS A record per server name does not Ext TabExt Tab Audio ConfigurationSPA9x2 Phone Field Reference Preferred codec for all calls. The actual codec used in a call stillSPA9x2 Phone Field Reference To enable silence suppression so that silent audio frames areExt Tab User Tab User TabDial Plan SPA9x2 Phone Field ReferenceTraffic Service Information Settings SPA962, page Audio Volume, page Call Forward, page Speed Dial, page Supplementary Services, pageWeb Information Service Settings SPA962, page Phone GUI Menu Color Settings SPA962 only, pageAudio Volume Web Information Service Settings SPA962Traffic Service Information Settings SPA962 Phone GUI Menu Color Settings SPA962 onlyUnit 2, page -179General, page General, page Unit 2, page -179General 932 Tab SPA962 only932 Tab SPA962 only Linksys SPA9x2 Phone Administration GuideUnit script is described in ”Unit/Key Configuration Scripts”SPA932 Status SPA932 StatusUnit 1-Displays information about the first SPA932 sidecar unit SPA9x2 Phone Field ReferenceSPA932 Status subscription expires, the SPA932 automatically requests a newCreating an LED Script Creating an LED ScriptLED Script LED Script ExamplesLED Pattern Creating an LED ScriptConfiguring a Dial Plan Configuring a Dial PlanDial Plan Digit Sequences Element Repetition Dial Plan RulesDigit Sequence Syntax Sub-sequence SubstitutionL delay-valuespace Interdigit Timer Master OverrideLocal Timer Overrides P delay-value spaceInterdigit Short Timer Dial Plan TimersInterdigit Long Timer InterdigitLongTimer defaults to InterdigitShortTimer defaults toDial Plans Configuring a Dial PlanEU Contacts ContactsUS/Canada Contacts Contacts8060952NC-EW