Linksys SPA962 manual Administrator and User Views, Using the Web User Interface, Getting Started

Getting Started

Using the Web User Interface

a.Press the Setup button, then press 9 or scroll to option 9 and press Select. b. Option 2 shows the phone’s current IP address.

3.Enter the IP address in your web browser address bar. For example: http://192.168.1.8

NOTE: If you are connected to a VPN, you must first disconnect.

4.Various tabs--Info, System, Phone, User, and so on--appear based on your account privileges and current view.

5.If you make changes, use the buttons at the bottom of the screen to either:

•Submit All Changes and save them. Some saved changes cause the SPA9x2 phone to reboot.

or

•Undo All Changes button to undo your changes.

NOTE: If you have trouble accessing the web UIweb UI, perform the following steps on the SPA9x2:

1.Press the Setup button on the phone.

2.Scroll to N9 Network using Navigation button and select it.

3.Scroll to 7 Enable Web Server and make sure that it is set to Yes. If not, press the Edit soft key and press y/n soft key to set it to Yes.

4.Press OK, then press Save.

NOTE: If your service provider disabled access to the web UI, you must contact the service provider.

Administrator and User Views

Depending on whether you are a VAR or service provider, you might have different privileges. By default, the Administrator account name is admin, and the User account name is user. These account names cannot be changed.

If the service provider set an Administrator account password, you are prompted for it when you click Admin login.

NOTE: No default passwords are assigned to either the Administrator or User accounts. Only the Administrator account can assign and change passwords.

Linksys SPA9x2 Administration Guide 21