Linksys SPA962, SPA942, SPA922 manual Monitoring the SPA932, SPA932 Unit Monitoring Notes

Using the SPA932 Sidecar

Monitoring the SPA932

Parameter	Description
Unit 1 Key 1-32	Enter a strings that define the extension and other parameters
	associated with each lighted button on the first SPA932 unit.
	Keywords and values are case-sensitive. The configuration
	script is described in ”Unit/Key Configuration Scripts”
	section on page 118.

Monitoring the SPA932

To display the status of the SPA932, click the SPA932 Status link on the SPA932 tab. The status of each sidecar attached (Unit 1 and Unit 2) is shown. Parameters are read-only.

SPA932 Unit Monitoring Notes

The following table describes each parameter; both units display the same parameters.

Parameter	Description
Unit Enable	Displays if the Unit is enabled or disabled.
Subscribe Expires	Displays when the current subscription expires. After the
	subscription expires, the SPA932 automatically requests a new
	subscription.
HW Version	Displays the version of the hardware.
Unit Online	Displays whether the unit is connected or not.
Subscribe Retry Interval	Displays the length of time the SPA932 waits to try again if
	subscription fails.
SW Version	Displays the version of the software currently running on the
	unit.
Key Name	Displays the name assigned to each key (1-32) on the SPA932
	sidecar unit.
Type	Displays the function enabled for each key (1-32) on the
	SPA932 sidecar unit.

Linksys SPA9x2 Phone Administration Guide 121